Duevi EZY-LAN HW 4A Handbuch für Installateure - Seite 8

Blättern Sie online oder laden Sie pdf Handbuch für Installateure für Sicherheitssystem Duevi EZY-LAN HW 4A herunter. Duevi EZY-LAN HW 4A 13 Seiten. Wireless alarm panel with ethernet + wi-fi + gsm + lte

Seite drucken

•

Action Name: is the name with which the

Action is identified in all menus, notifications,

events, etc.

•

Type of Action:

✓ Arming

Operation on Sectors: No change [the

sector

keeps

Activate

Deactivate [the sector is disarmed].

✓ Relay control

✓ White light contro

✓ RGB light control

✓ Rolling shutter control

Once the type of output control has been

selected, it is possible to select one or more

outputs to control and the command to use, which

can be selected from the following:

•

Deactivate - Deactivates the relay or turns off

the light

•

Activate - Activates the relay or turns on the

light (with the last stored settings)

•

Switch over - Changes state to relay or light.

If the relay is active (or the light is on) it

deactivates it (or turns off the light) and vice

versa

•

Open

completely

•

Close completely - Completely closes the

shutter

•

Set - Sets all the features available for the

output based on the type of output:

Brightness

Color temperature (K)

Fade

RGB color

Opening percentage (roller shutter)

12.4 Users (SETUP)

USERS

can

control

competence through:

•

Use of the App with username and password

•

Keyfob

The USERS page contains the list of all created

users.

By default there is only the installer user, the only

user who has access to the control panel setup.

Pressing the icon

settings, where you can change the properties

and tools used.

•

User Name: is the name by which the user is

identified in all menus, notifications, events,

etc.

•

User type:

its

[the

sector

Opens

the

sectors

(trash can) deletes the User.

(gear) you enter the User

•

Associated sectors: indicates which sectors

state],

the user can control

armed],

•

Allowed scenarios: indicates which scenarios

the user can execute

•

Allowed images: indicates which devices with

video verification the user can see

•

Time limitation: [only for Normal user] enables

the user only within the time slots established

in the selected time program

•

Generate arming notifications: enable/disable

the generation of notifications every time the

user changes the arm status

•

Phone 1/2: telephone numbers to which text

messages / calls can be sent

•

Email: email address to which notifications

should be sent

Tools

•

Username (APP): username for APP login

•

Password (APP): password for APP login

shutter

Keyfob Management

Pressing the icon

wireless keyfob. First press button 5 and then at

the same time also button 6.

Once a keyfob has been added, the association

of the programmable buttons will also appear.

Pressing the icon

keyfob.

The 1-2-3-4 buttons are freely programmable

Button 5 is programmable only for panic alarm /

silent alarm

NOTE: The operations assigned to the

buttons must first be defined in the

their

ACTIONS or SCENARIOS

Button 6 is not programmable, it can only

request system status and then displays:

TOTALLY ARMED

DISARMED

PARTIALLY ARMED

12.5 Notifications (SETUP)

The NOTIFICATIONS page allows you to enable

the various notifications that the control panel

sends to users.

The notifications available are text messages,

voice call, email, push notification.

It is possible to view notifications by Category or

by User.

Administrator

[user

privileges, can enable installer, can modify

notifications, etc],

Normal [user with reduced privileges],

Police [user limited to the telephone

number to call in case of alarm]

(plus) you can add a new

(trash can) deletes the

with

extended

Led 1/2/3/4 steady ON

Led 1/2/3/4 flashing

Led 1/2 steady ON

Led 3/4 OFF