Addi-Data MSX-E1701 Schnelle Installation - Seite 7

Blättern Sie online oder laden Sie pdf Schnelle Installation für Netzwerk-Hardware Addi-Data MSX-E1701 herunter. Addi-Data MSX-E1701 8 Seiten. Ethernet multifunction counter system

Seite drucken

When you click on the name of one of these systems, corresponding product information

such as IP address, MAC address and firmware version will be shown on the right side of

the main window.

To scan the connected systems once again, for example after connecting another

MSX-E system, you have to click on the green icon in the top right of the ConfigTools

Explorer area.

Below the "Product Information" area, there are buttons that enable you to perform

various actions and to access the web interface of your MSX-E system.

The following actions are possible:

- IP Address: Change the IP address of the MSX-E system in order to adapt it to your

corporate network, for example.

- Web Interface: Access the web interface of your MSX-E system and change the

configuration.

- Save General Configuration: Save the general configuration of the MSX-E system

(including, for example, the network configuration), i.e. all the settings defined on the

web interface apart from the I/O configuration.

- Load General Configuration: Load a file containing the general configuration of the

MSX-E system.

- Save I/O Configuration: Save all function-specific settings defined on the web

interface under "I/O Configuration".

- Load I/O Configuration: Load a function-specific configuration.