Abtus AVS-311 Benutzerhandbuch - Seite 2

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Schalter Abtus AVS-311 herunter. Abtus AVS-311 2 Seiten. Multimedia controller switcher

Seite drucken
User Operation Guide
PRODUCT DESCRIPTION
The ABtUS AVS-311 Media Control Panel is one of the most user friendly and installer friendly
Pre-Programmable Controller specifically designed for a easy and central control of any AV
projection system. It removes the need for over-complicated and multiple remote control handsets.
PRODUCT HIGHLIGHTS
·
Programmable projector protocol
·
Simple to used with one to one function controlled button with LED indication
·
Works well with any monitors, projectors and Interactive White Board
·
Supports 3 VGA input with resolutions from VGA to SXGA
·
Easy Installation with standard 2.45mm connector and cabling
·
Fully self contained / integrated Projector Controller with AV switcher and USB in
·
With 1 USB Input Connections (1 x USB Type B)
TURNING ON AND BASIC OPERATION CONTROL
3. PC-1 Button
4. PC-2 Button
Used to select Projector Input to
Used to select Projector to “PC”
“PC” Input and its inter VGA
Input and its inter VGA switcher
switcher and audio switcher to
a n d a u d i o s w i t c h e r t o P C - 2
PC-1 (Laptop) accordingly. The LED
(Desktop) accordingly. The LED
will blink once and stay ON
will blink once and stay ON
2. POWER ON Button
Used to TURN ON projector power,
LED will blink and stay ON after
The “Warm Up Time”. Stated that
the projector is now READY!
Switcher will auto set input to its
default selection i.e. “PC-2”
1. POWER OFF Button
Used to TURN OFF projector power,
LED will blink and stay ON after The
“Cool Down Time”. Stated that the
Projector is now READY!
15. Audio Video Input
Audio Video Input port for DVD or
VRC connection
14. PC-1 Input
13. PC-2 Input
VGA Input port with PC-Audio for
VGA Input port with PC-Audio for
Laptop connection
Desktop connection
16. Monitor Out
Connected to local
LCD Monitor.
Monitoring input PC2
& PC3 only
5. PC-3 Button
6. AV Input
Used to select Projector Input to
Used to select Projector Input to
“PC” Input and its inter VGA
“AV” Input and its inter Audio
switcher PC-3 (Document Camera)
s w i t c h e r
t o
V i d e o - A u d i o
accordingly. The LED will blink
accordingly. The LED will blink
once and stay ON
once and stay ON
7. Wireless Button
U s e d t o s e l e c t P r o j e c t o r t o
“Wireless/Network” Input and its
inter audio switcher to Network
accordingly. The LED will blink
once and stay ON
8. Pic Mute Button
Used to select Projector to “Pic
blank” ON/OFF and its inter audio
switcher to mute accordingly. The
LED will blink once and stay ON
9. Main Volume Control
Tuning Up and Down of the main
Volume level
10. Mic Gain Control
Tuning Up and Down of the Mic
Gain level
12. Mic Input
11. PC-3 Input
For both 6.3mm and 3.5mm
VGA Input port for Document
Microphone Input connection
camera connection
17. USB IN
1 x USB Type B
for Interactive Board
INTERNAL PCB LAYOUT AND INTER CONNECTION
Main DC Supply Input
Projector Table Setting
Power source
Selection of Command
connected from Multi-
set for controlling of
Media Speaker.
different projectors.
Audio Line Input
Connected from “Line
Out” of the Projector for
Auto Monitoring.
Main Audio-Output
Connected to "Audio In"
of the Multi-Media
Speaker system.
Video-Output
"Connected to
"Video-In"
of Multi-Media
Projector
PROGRAMMING SOFTWARE
Save File
Read Devide
Saving of a “project”
Reading the
Program done
“project” program
loaded in the device
Load File
Loading a exceeding
“project” program
Program Button
Selection of button
to be programmed
Command Code
Projector Hex code
Entry window
Delay Time
Projector Power
ON, OFF and
Switching
Respond time
** For detail and updated Command and program software, please visit and download from www.abtussingapore.com
* Specifications are subject to changes without notice.
RS-232/TX Out
Config Port
Connected to “RS-232”
For configuring
com-port” of Multi-
programming of the
Media Projector.
“RS-232 TX Out”
Connected to “VGA In”
of a LCD/CTR Monitor.
Connected to “VGA-1
In” of the Multi Media
Com Setup
Help
Setup for Com port
About Media
Between device and
Programmer
PC default: 9600, 8, N, 1
AVS-311
“project” program
done to the device
Projector Com Port
Setting up the
Projector Com port
Projector Model
Window for input of
Projector model
number as reference
Monitor-Output
Switching
between PC-2/PC-3
USB Type B IN
USB Type B In
connected from PC
to IWB or Interactive
Projector
Main VGA-Output
Projector. Switching
between PC-1/PC-2
and PC-3
White Device
Loading for a
parameter