Duevi EzyDriveCAM Hardware-Installationshandbuch - Seite 8

Blättern Sie online oder laden Sie pdf Hardware-Installationshandbuch für DVR Duevi EzyDriveCAM herunter. Duevi EzyDriveCAM 14 Seiten.

3. Installation

Before the installation

Each EzyCAM device must be configured before its use.

At the first start and configuration DO NOT CONNECT neither SD memory cards nor BATTERY, only

main power supply and data connection.

After first configuration is possible to add SD cards and battery.

It is recommended to connect the EzyCAM to be programmed directly to PC and not through a LAN.

Program the camera, then install and finally make some test and adjustments.

To program is required:

a) PC with fixed IP address (see network settings) and EzyViewCAM software installed (for the use of

EzyTV see proper manual)

b) disable or configure firewall and/or protection software (they can block communication between PC

and EzyCAM)

At the end of programming it will be possible to connect all the EzyCAM to the network.

LAN connection: proceed one

EzyCAM at time

After each programming, replace with the next EzyCAM:

EzyCAM 2

EzyCAM 1

EzyCAM 3

EzyCAM n