AirVax 33X2 Benutzerhandbuch - Seite 3
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Luftreiniger AirVax 33X2 herunter. AirVax 33X2 16 Seiten. Permanence-static electricity-film-filter air purifier
Auch für AirVax 33X2: Benutzerhandbuch (8 seiten)
Seite drucken
PART NAMES
1. MAIN UNIT
Air intake
Top cover
SEFF
TM
Indicator / Operator
Remote
control sensor
Air outlet
Front
2. ACCESSORIES
Remote control
Lithium battery
(CR2025)
AC 110~240V/DC12V AC-DC
INSTALLATION
1. INSTALLING THE MAIN UNIT
Unseal the box and retrieve the
Place the unit on an appropriate place and
unit from the box carefully.
insert the plug into a wall outlet. Check
whether the light blinks on the indicator.
2. INSTALLING THE REMOTE CONTROL
Open the cover as shown
Mount the battery as shown below
below.
(Lithium Battery CR2025).
4
Viewfinder
Jack connector
Back
Adapter(1.0 A)
Manual
Select the mode by pressing a button or
using the remote control
(OPERATING
THE MAIN UNIT for more details).
Replace the cover.
SAFETY PRECAUTIONS
1. RISK OF ELECTRIC SHOCK
Do not use the unit if the AC-DC Adapter or plug is damaged or the connection to the wall outlet is loose
(electric shock, short circuit, and/or fire may occur).
Do not damage, break, coat, forcefully bend, pull, twist, bundle, pinch or place heavy objects on the AC-DC
Adapter.
(may damage the power cord, which in turn may cause fire and/or electric shock).
Use AC 120V and DC 12V only
(to avoid fire and/or electric shock).
Do not modify. Repair and disassembly of this product should be performed by authorized service personnel
only
(to avoid fire, electric shock, and/or bodily injury). Contact your dealer or IDEAVAX Service Center for repair.
Periodically remove dust from the power plug
(accumulated dust on the power plug may result in poor insulation from humidity, etc., thereby causing fire and/or
electric shock).
When cleaning the unit, be sure to remove the power plug from the wall outlet. Never touch the power plug with
wet hands
(electric shock and/or bodily injury may occur).
Do not use the unit where there are oil ingredients such as cooking oil in the air
(surface of the unit may crack).
Do not apply benzene or paint thinner or spray insecticide on the unit
(cracking, electric shock, and/or fire may occur).
Do not allow the unit to take in flammable gases, sparks from lit cigarettes, incense, etc.
(may cause the unit to ignite).
Do not use the unit in humid areas such as bathrooms or areas near moisture
(electric shock and/or malfunction may occur).
Do not insert your fingers or foreign objects into the intake or air outlet
(electric shock and/or malfunction may occur).
When unplugging the unit, always hold the plug; never pull the cord
(electric shock and/or fire due to short circuit may occur).
Ventilate when using the unit together with a heating appliance
(to avoid carbon monoxide poisoning).
Remove the power plug when the unit is not in use
(to avoid electric shock due to poor insulation and/or fire due to short circuit).
For safety, have the AC-DC Adapter replaced by the manufacturer, its service agent, or other qualified person in
case of damage. The battery must be removed from the remote control before it is disposed. Dispose of used
batteries safely.
2. CAUTIONS RELATED TO THE OPERATION OF THE PRODUCT
Do not block the intake and air outlet. Do not use the unit near or on hot objects such as a stove. Avoid using the
unit in areas where it may come into contact with steam. Do not use the unit on its side
(deformation, malfunction, and/or overheating of the motor may occur).
Do not install in areas where oily residue is generated, e.g., kitchen. Do not use detergent in cleaning the unit
(may damage the unit or cause cracking or malfunction of the sensor).
Do not operate the unit without the filter
(no purification effect will be generated; may also cause trouble).
Do not wash the e-Film filter for nano-dust
(wet e-film filter for nano-dust can cause breakdown or fault in the product).
Do not carry the product by the top cover
(the top cover is made for opening and shutting the product;
breakdown may occur if the product is not completely closed or when shaken due to fall).
5