Cascade C Series Taschenhandbuch für Bediener - Seite 2
Blättern Sie online oder laden Sie pdf Taschenhandbuch für Bediener für Industrielle Ausrüstung Cascade C Series herunter. Cascade C Series 2 Seiten. Weigh forks
Auch für Cascade C Series: Installationsanleitung Handbuch (10 seiten)
Seite drucken
SAFETY RULES
NO RIDERS
NO UNDER LOAD
LOAD HANDLING
BASIC WEIGHING
2
Press the "ON/PRINT"
button. Wait 5 seconds.
3
Display will zero. If necessary,
zero manually.
Verify forks are free of
obstacles prior to zeroing.
NO REACH
THROUGH MAST
Working temperature range:
-4° F (-20° C) minimum
105°F (40° C) maximum
The indicator can be toggled between lbs
and kg. Refer to Indicator Functions section.
Printer output is in units selected during
calibration.
Preparing Mast for Weighing:
FK0139.eps
IMPORTANT:
• At initial daily start up, allow 3-5 minutes for the forks to
• The system will not weigh correctly if the front face or
• Unstable weight readings indicate debris between fork
• When weighing liquids, more time is needed for indicator
• Do not exceed fork length by more than 6 in. (152 mm)
FK0652.eps
Position to vertical
For legal trade:
NTEP – ±5% (3°) Horizontal
Level load to
Horizontal
FK0140.eps
warm up before weighing loads.
bottom of the forks touches the load and pallet.
and fork shoe.
to show a steady weight.
with load length.
5
Weigh load. Before next
weighing, check zero point.
1
Press the blue
button on each
battery pack
4
Position load
on forks,
raise forks
FK0653.eps