Cascade Turnafork 45E Installationsanleitung Handbuch - Seite 3

Blättern Sie online oder laden Sie pdf Installationsanleitung Handbuch für Elektrowerkzeug Cascade Turnafork 45E herunter. Cascade Turnafork 45E 11 Seiten. Non-sideshifting & sideshifting clamps
Auch für Cascade Turnafork 45E: Installationsanleitung Handbuch (14 seiten)

Seite drucken

RUCK REQUIREMENTS

WARNING: Rated capacity of the truck/

attachment combination is a responsibility of the

original truck manufacturer and may be less

than that shown on the attachment nameplate.

Consult the truck nameplate.

Truck Relief Setting

2300 psi (160 bar) Recommended

2600 psi (180 bar) Maximum

Truck Flow Volume

20E, 30E, 33E,

40E, 45E

Cascade E-Series Clamps are compatible with SAE 10W

petroleum base hydraulic fluid meeting Mil. Spec. MIL-0-5606 or

MIL-0-2104B. Use of synthetic or aqueous base hydraulic fluid

is not recommended. If fire resistant hydraulic fluid is required,

special seals must be used. Contact Cascade.

Flow less than recommended will result in reduced system

performance.

Flow greater than maximum can result in excessive heating,

reduced system performance and reduced hydraulic system life.

Carriage Mount Dimension (A)

Class II

Class III 18.68 in. (474.5 mm)

GA0028.ill

Auxiliary Valve Functions

Check for compliance with ITA (ISO) standards:

GA0082.ill

212115 Rev. 0

Min.

Recommended

5 GPM

7.5 GPM

(19 L/min.)

(28 L/min.)

Minimum

14.96 in. (380.0 mm)

15.00 in. (381.0 mm)

18.74 in. (476.0 mm)

Tilt

forward

Sideshift

Hoist down

Left

Hoist up

Sideshift

Right

Tilt

back

Max.

10 GPM

(38 L/min.)

ITA (ISO)

Maximum

Release

Clamp

Carriage

Clean carriage bars and inspect for

damaged notches

GA0080.ill