DUI ZipSeals Benutzerhandbuch - Seite 2

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Sicherheitsausrüstung DUI ZipSeals herunter. DUI ZipSeals 5 Seiten.

Seite drucken

Congratulations on purchasing DUI ZipSeals and/or ZipGloves. Properly used they will make your diving more comfortable and enjoyable. DUI ZipSeals

and ZipGloves are intended for use by certified divers trained in the use of drysuits or individuals under the direct supervision of a qualified instructor.

This manual includes the installation and use of all versions of DUI ZipSeals and ZipGloves. It does not replace the DUI Drysuit Owners Manual. You can

obtain a copy of the DUI Drysuit Owners Manual by contacting DUI at 619.236.1203, toll free at 800.325.8439, e-mail [email protected]

or download from the DUI website at www.DUI-Online.com.

ZipSeals

™

WRIST

Installing Wrist ZipSeals

1.Your drysuit must be equipped

with ZipRings on the sleeves

2. Apply a small amount of soapy

water into the grooves on the wrist

ZipSeal (1 part mild dish soap to 10

parts water).

3. Invert the seal so you can get

your fingertips on the inside of the

ZipRing (this will help you press the

rings together)

4. Insert the entire ring of the

ZipSeal into the sleeve.

Improper use or misuse of ZipSeals/ZipGloves could result in suit flooding and loss of buoyancy control, including uncontrolled descents and

uncontrolled rapid ascents, resulting in drowning, decompression sickness, or air embolism.

Improper use or misuse of ZipSeals/ZipGloves could result in exposure to thermal hazards, including rapid body overheating (hyperthermia)

or cooling (hypothermia) resulting in stroke or seizure.

5. Line up the grooves on the wrist

ZipSeal with the grooves on the

sleeve. Press together.You should

feel the grooves "click" together.

6. Repeat the procedure on the

other sleeve.

Remember: ALWAYS double check

each ZipSeal before every dive to

ensure the grooves are securely

snapped together.

Removing Wrist ZipSeals

1.While holding onto the ring on

the sleeve, gently insert the tip of

your finger into the groove on the

ZipSeal.

2. Gently peel back the wrist

ZipSeal while pulling the ring on the

sleeve outward. Remove the rest of

the wrist ZipSeal from the sleeve.

3. Repeat on the other sleeve.

! ! WARNING ! !

Installing & Using

DUI ZipSeals

ZipGloves

NECK

Installing a Neck ZipSeal

1.Your drysuit must be equipped

with a ZipRing on the neck.Turn the

suit inside out.

2. Spray a small amount of soapy

water into the grooves on both

sides of neck ZipSeal (1 part mild

dish soap to 10 parts water).

3. Pull the double ring on the

drysuit slightly apart

4. Completely insert the neck

ZipSeal into the ZipRing on the

drysuit and line up the grooves.

™

5. Press the grooves together with

your fingertips until you feel the

grooves "click" together.

Remember:There are two sides of the

drysuit neck ZipSeal and both sides

need to be locked in place.

6. After pressing them together run

your fingers around the neck

ZipSeal once more to ensure it is

secure on both sides of the neck

seal.

7.Turn the suit right side out before

diving.

Removing a Neck ZipSeal

Removing a neck ZipSeal can be

more difficult as it is locked

between two rings

1. Insert your fingertip between the

ZipRing on the neck seal and the

ZipRing on the drysuit.

(continued on reverse side)