Addictive audio BOOST Series Handbuch für Besitzer und Installation - Seite 2
Blättern Sie online oder laden Sie pdf Handbuch für Besitzer und Installation für Verstärken Addictive audio BOOST Series herunter. Addictive audio BOOST Series 15 Seiten.
Seite druckenSpecifications
B250.4
(13.8V)
Signal to Noise Ratio 101dB
High Efficiency 77% THD:
0.1%
Lowest Recommended Load:
4ohm Stereo
B450.1
(13.8V)
Signal to Noise Ratio 104dB
High Efficiency 79%
THD: 0.05%
Lowest Recommended Load:
2ohm Mono
_______________________________________________________
Common Design Features
B250.4 Design Features
B450.1 Design Features
65x4 watts RMS @ 4ohm
Do Not Operate at 2ohm or
1ohm Stereo
N/A
Heavy Duty Copper Trace PCB Board
Direct Cable Connection for Superior Conductivity
Phase Adjustment
Heavy Duty Aluminum Heatsink for Max. Heat Dissipation
Input Sensitivity: 220mV – 6.6Vrms
Engineered in the U.S.A.
Bass Boost from 0 to +18dB (45Hz)
Low Pass Filter: 40 – 400Hz (-12dB/Octave)
High Pass Filter: 40 – 400Hz (-12dB/Octave)
Remote Gain Control
Bass Boost from 0 to +18dB (45Hz)
Low Pass Filter: 50 – 300Hz (-12dB or -24dB/Octave)
Subsonic Filter: 15 – 60Hz (24dB/Octave)
Frequency Response -3dB 15Hz – 238Hz
Class D High Efficiency Design
Auto-Start High-Level Signal Input and Remote Turn On
STEREO
STEREO
2
BRIDGED
135x2 watts RMS @ 4ohm
Do Not Operate at 2ohm or
1ohm Bridged
BRIDGED
225x1 watts RMS @ 4ohm
450x1 watts RMS @ 2ohm
Do Not Operate at 1ohm