cascade corporation 55A Benutzerhandbuch - Seite 11

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Ventil-Stellungsregler cascade corporation 55A herunter. cascade corporation 55A 18 Seiten.

Seite drucken
I
NSTALLATION
8
Install Forks
A
Disconnect cylinder rod-end anchors from
fork carriers and retract cylinder rods.
B
Rotate fork carriers up to provide clearance
for fork installation.
C
Install forks using bottom fork slot to
engage forks with sideshifter carriage.
D
Line up forks with fork carriers on frame and
rotate fork carriers down into position over
forks. Assure fork spacer plates are in
place if required.
E
Reconnect cylinder rod anchors using two
hardened washers and self-locking nut (see
illustration below). Adjust nut to provide
1/32 in. (1 mm) clearance in joint. Use flats
on cylinder rod end to prevent turning.
IMPORTANT: Joint must function with a
loose operating clearance. Lubricate with
chassis grease.
Fork Spacer Plate
(if required)
1849482-R2
WARNING: Remove locking pins
from forks. Assure that forks slide
freely on sideshifter carriage bars.
Cylinder Rod End
Wrench Flat
D
FP0610.ill
FP0608.ill
Sideshifter
Assembly
E
1/32 in. (1 mm)
Hardened Washers (2)
FP0603.ill
D
C
Forks
Self-Locking Nut
Backrest
Fork Positioner Frame
Fork Carrier
B
9