Airvolution ARC90BS Benutzerhandbuch - Seite 8

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Lüftungshaube Airvolution ARC90BS herunter. Airvolution ARC90BS 17 Seiten. Canopy rangehood 60cm/90cm

Seite drucken

1. Specifications

Ducting options

Before beginning the installation of your

rangehood, the method of ducting should be

considered and selected. The guide below

illustrates the various ducting options.

Note:

This rangehood can be operated in recirculation

mode where required, although it is

recommended to duct wherever possible.

Fig. 2

Fig. 3

— Straight up and through your tiled or metal

roof. (Fig. 2)

— Into your ceiling cavity and then vented

through your eaves. (Fig. 3)

— Through your wall (Fig. 4)

Further to your various ducting options,

below are some tips on how to correctly duct

your rangehood:

– Always use correctly sized ducting:

DO NOT reduce the size of the ducting

– Always use solid ducting

– Always use non-flammable ducting

– Always duct to the outside atmosphere

– Do not use flexible ducting

– Do not duct into the ceiling space:

always vent to the outside atmosphere.

– Avoid sharp 90 degree bends as much

as possible, use 45 degree bends instead

wherever possible

– Duct to the outside atmosphere using the

shortest duct run possible

– Use cylindrical ducting whenever possible

Positioning the rangehood:

Installation heights

– Over gas and electric cookers, we

recommend our rangehoods to be mounted

at a height of between 600-800mm above

the cooking surface.

– Electric cooktops must have a minimum

height of 600mm from the underside of the

rangehood to the cooktop face.

– Gas cooktops must have a minimum of

650mm from the burner to the underside

of the rangedhood.

– Gas Regulations require the fi lters of the

rangehood to be at least 1200mm above the

cooking surface when used over open flame

grillers or barbecues.*

* We do not recommend this rangehood

for outdoor use or being installed above

barbecues/open flame grillers.

Fig. 4