Duke FCP2-SB Installations- und Betriebshandbuch - Seite 9
Blättern Sie online oder laden Sie pdf Installations- und Betriebshandbuch für Kommerzielle Lebensmittelausrüstung Duke FCP2-SB herunter. Duke FCP2-SB 12 Seiten. Flush mount cold pan
Seite drucken
Standard Controls
Touch Screen Control
Step 1
Touch on/off
button.
FMCOLD PAN
Step 2
Select the applicable mode of the unit:
low
Med
High
FMCOLD PAN
Installation and Operation of: Drop In Flush Mount Cold Pan
OPERATION
Optional Mechanical Controls
General Operating Instructions:
Turn Cold Panl Unit on by positioning power switch
to the up position.
Temperature
Controller
Power Switch
Adjusting Thermostatic Digital Control :
Your cold pan has been preset in the factory to
satisfy most applications. Due to conditions which
may exist in your operation, you may need to adjust
the thermostat on your unit for colder or warmer
temperature. The thermostat is located under the
unit and to the left of the condensing unit. The
temperature of your unit may be adjusted by
pressing the up (to raise) or down (to lower) arrow.
The set point is shown in the display and starts
blinking. Press up or down arrow to change set
point. After 3 seconds the display stops blinking and
returns to actual temperature.
Condensing Coil
Power Switch
Digital Display
9