Airwalk EdgePoint PRO Installationshandbuch - Seite 11
Blättern Sie online oder laden Sie pdf Installationshandbuch für Drahtloser Zugangspunkt Airwalk EdgePoint PRO herunter. Airwalk EdgePoint PRO 19 Seiten.
Auch für Airwalk EdgePoint PRO: Referenzhandbuch (15 seiten)
Seite druckenEdgePoint PRO Installation Guide
______________________________________________________________________________
•
For optimal performance of the device, a back haul bandwidth of 5 Mbits should be
reserved for each device.
•
For cluster configuration, each device within the cluster needs its own linear back
haul bandwidth. All the devices within a cluster require the same back haul network
for optimal performance.
Static IP Addressing Scheme
The eFemto supports static IP addressing for the device. The device is shipped from the
factory using DHCP IP addressing scheme. The USB cable provided should be used to set
static IP address for the device (see EdgePoint PRO - USB Console User Guide for more
information).
When using static IP address for the device, along with the IP address, the Subnet Mask,
default Gateway and DNS server information should also be provided to the device using the
USB connection.
4.3
Hardware Configuration
The eFemto offers a unique combination of 1xRTT and EV-DO radio and controller in one
physical platform that is differentiated from other systems. The eFemto comes equipped
with a Network Listener module which aids the device in sniffing its RF environment to
reduce interference to existing Macro networks. The device also has an in-built GPS receiver
which is used to validate the position of the device once it becomes operational.
The following table lists the eFemto device specifications:
EdgePoint PRO Specifications
RADIO
CONTROLLER
INTERFACES
POWER SUPPLY
ENVIRONMENTAL
HARDWARE
AirWalk Proprietary and Confidential
Technology
Frequency Bands
Simultaneous Calls
Transmit Power
Configuration
Handoff
Integrated
Core Network Interface
PDSN
AAA+HA
SeGW
AC
Temperature
Humidity
Installation
Dimensions (HxWxD)
CDMA 1xRTT and 1xEV-DO Rev. A
1900 MHz
Up to 29 simultaneous voice calls
Up to 32 active data sessions
200 mW
1 carrier / omni
Soft / hard
BTS, BSC, RN, RNC, PCF and O&M
SIP/IMS
RTP/MGW
IP-10/100 Base T Ethernet – (A10,
A11)
IP-10/100 Base T Ethernet – (A12)
IKEv2
15 amps maximum / 120V AC
Operating 0°C to 50°C (32°F to
122°F)
0 to 95% non-condensing
Wall mount
12" x 14.6" x 2"
Page 11 of 19