Airwalk 50CM PRO SLIDER Gebrauchsanweisung - Seite 2

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Fahrrad Airwalk 50CM PRO SLIDER herunter. Airwalk 50CM PRO SLIDER 7 Seiten.

PARTS LIST

ASSEMBLY

Insert front wheel assembly (part 3) into the open ends of the Front

fork (part 2). Attach the two end covers and secure with bolt and nut

(part 11)

Repeat for the other side.

The stem is pre-assembled .If necessary, rotate the stem and fork

to face the forward position. Ensure the stem is aligned with the

front fork and facing the correct direction.

Tighten the top bolt (A) of the stem and the stem bolts (B).

WARNING: If the handlebar clamp is not tight enough, the

handlebar can slip in the stem. This can cause damage to the

handlebar or stem, and can cause loss of control.

Part

Description

No.

Main Frame

Front fork

Front wheel

Handlebar

Pedals

Rear tube

Rear axle

Rear wheels

Seat

M6x30mm bolts and nuts

M6*21mm bolts

M8x50mm Hex bolts and nuts

8 washers and nuts

M8x65mm

washers

Quantit

Hex

bolts

and

1 set

4 sets

2 sets