DUKWIN DK Series Handbuch - Seite 10

Blättern Sie online oder laden Sie pdf Handbuch für Zubehör DUKWIN DK Series herunter. DUKWIN DK Series 15 Seiten. Watch winder

Note:

· Factory Mode: Any ﬁngerprint can be unlocked

· Status of successful ﬁngerprint enter: The blue light will be on for 2 seconds.

· Status of unsuccessful ﬁngerprint enter: The red light will ﬂash for 3 times.

· The ﬁngerprint sensor can set up to 20 ﬁngerprint users(2 administrator

and 18 user accounts)

· The ﬁrst two ﬁngerprints entered are administrators by default.

· Please do not set duplicate ﬁngerprints account.

6.1 Fingerprint Accounts Setting

There are two ﬁngerprint setting modes: Using Fingerprint Veriﬁcation OR

Using Admin Key.

6.1.1 Fingerprint Veriﬁcation Setting Mode

1. First administrator ﬁngerprint account setting:

Press and hold the ﬁngerprint sensor panel for 7 seconds, do not release

your ﬁnger, after the blue indicator ﬂashes 3 times, you can release your

ﬁnger, and then the pink indicator ﬂashes once, indicating that it will enter

the ﬁngerprint registration state: Using the ﬁngerprint you deﬁned as an

administrator, input 6 valid presses continuously on the panel, the blue light

will ﬂash once every time you press it, until the system collects your ﬁnger-

prints 6 times, the blue light will be on for 2 seconds, indicating that the ﬁrst

ﬁngerprint entry is successful, and exit the ﬁngerprint entry mode.

Note:

During ﬁngerprint entry, if the red light ﬂashes, it is invalid entry, and it is

necessary to continuously enter valid ﬁngerprints for 6 times with the blue

light ﬂashing 6 times.

2. Second administrator ﬁngerprint account setting:

Press and hold the ﬁngerprint sensor panel for 7 seconds, do not release

your ﬁnger, after the blue indicator ﬂashes 3 times, you can release your

ﬁnger, and then the pink indicator ﬂashes once, indicating that you should

enter once your ﬁrst administrator ﬁngerprint to conﬁrm, then put your

second administrator ﬁnger on the panel input 6 valid presses continuously.

The blue light will ﬂash once every time you press it, until the system collects

your ﬁngerprints 6 times, the blue light will be on for 2 seconds, indicating

that the second administrator ﬁngerprint entry is successful.