DUKWIN DK Series Handbuch - Seite 7

Blättern Sie online oder laden Sie pdf Handbuch für Zubehör DUKWIN DK Series herunter. DUKWIN DK Series 15 Seiten. Watch winder

3.3 ALL Mode

Tap the "ALL" button 4 times until the top left corner of each of the four

options shows a ticked icon, or Press the "motor selection" and "Run"

buttons at the same time for 5 seconds, and then tap the "Run" button. All

watches will be set to the current mode. . If you change the parameters of

"Switch - TPD - Direction", all watches will be change to the current

parameters.

(If you have any questions, check out our YouTube video link)

Motor Options

Motor Options:

If the current mode is ALL, just tap the "ALL" button again, the "Motor Options"

will appear, and you can set the mode of each motor individually.

New Watch Mode: Press and hold the "TDP" button until " ----" diagram is

displayed.

----

Note: During the new watch mode, any operation will cause the new watch

mode to exit and return to the previous settings.