AOG IRB-18 Anleitung Handbuch - Seite 2
Blättern Sie online oder laden Sie pdf Anleitung Handbuch für Brenner AOG IRB-18 herunter. AOG IRB-18 6 Seiten. Infrared burner kit
Seite drucken5. Open the control panel. If needed, refer to the owner's manual
included with your grill.
Note: Pull out the drip tray slightly and use to support the control
panel when opening.
6. Remove the existing igniter box by fi rst loosening the nut on
the faceplate side of the fi re wall with a wrench. Disconnect
the wire connector from the electrode and pull it through the
hole (see Fig. 2-1). Unplug the other end and discard the old
wire (see Fig. 2-2).
REV 6 - 1607150855
INSTALLATION (cont.)
2
Old igniter
Fig. 2-1 Remove old igniter electrode
Original models
Igniter
module
"L" series models
Fig. 2-2 Remove old igniter wire
Igniter
module
L-C2-267