Danfoss iC7 Series Installationshandbuch - Seite 14

Blättern Sie online oder laden Sie pdf Installationshandbuch für DC-Antriebe Danfoss iC7 Series herunter. Danfoss iC7 Series 16 Seiten. In-bottom/out-back cooling kit for fa09-fa10, frequency converters
Auch für Danfoss iC7 Series: Installationshandbuch (8 seiten), Installationshandbuch (8 seiten), Installationshandbuch (6 seiten), Installationshandbuch (14 seiten), Installationshandbuch (16 seiten), Installationshandbuch (8 seiten), Installationshandbuch (8 seiten), Installationshandbuch (10 seiten), Installationshandbuch (16 seiten), Installationshandbuch (6 seiten), Installationshandbuch (6 seiten), Installationshandbuch (16 seiten), Installationshandbuch (18 seiten)

In-bottom/Out-back Cooling Kit for FA11-FA12

Installation Guide

Secure the top of the frequency converter using 3 M10 screws.

Torque the 6 M10 screws to 19 Nm (170 in-lb).

Illustration 12: Installation in Cabinet

Frequency converter

Rittal cabinet

Mounting plate

Backplate

M5 clip-on nut

2.10 Attaching the Bottom Duct to the Duct Support Bracket

After the frequency converter is installed on the mounting plate, attach the telescopic bottom duct to the duct support bracket

using the following steps.

Procedure

Extend the telescopic bottom duct upward until the upper flange of the duct is positioned against the duct support brack-

et.

Secure the duct to the bracket with 4 M5x14 screws (T25).

Torque fasteners to 2.3 Nm (20 in-lb).

Back duct

M6x12 screw

M5x18 screw

8-hole gaskets

6-hole gaskets

AN361429392581en-000201 / 136R0253

Installation