AOK TX2056A Handbuch - Seite 16

Blättern Sie online oder laden Sie pdf Handbuch für Wetterstation AOK TX2056A herunter. AOK TX2056A 18 Seiten. Rc weather station with bbq weather display and outdoor sensor

Seite drucken

Resolution: 0.1°C

Accuracy: 0~40°C +/-1°C; other +/-2°C

Humidity measuring range: 20 % to 95 % relative humidity

Resolution: 1 %

Accuracy: 30~80% +/-5%, other +/-8%

Wireless sensor

Model no.: AOLD-2056A

Batteries: 2 x LR6 (AA) 1.5 V

Temperature measuring range: -

20°C ~ 50°C (-4°F ~ 122°F)

Protection type: IPX4

Transmission frequency: 433 MHz

Range: max. 100 meters (in open area)

RF Max power : <6dBm

FCC ID: 2AJOATX2056A

Applicant: AOLD Electronic Limited

Address: Tianxin Industrial District, Dahou Village, Xiegang Town, Dongguan City, Guangdong Province,

China.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)

This device may not cause harmful interference, and (2) This device must accept any interference received,

including interference that may cause undesired operation

WARNING: Changes or modifications to this unit not expressly approved by the party responsible for

compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation.

The RF Exposure Compliance distance is 20 millimeters.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. However, there

is no guarantee that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.