CashCode AMZ-PLUS Einbauanleitung - Seite 5

Blättern Sie online oder laden Sie pdf Einbauanleitung für Banknotenprüfgerät CashCode AMZ-PLUS herunter. CashCode AMZ-PLUS 5 Seiten. Stackerless with plcc type cpu chip, for the new dollar 5 and 10 upgrade kit
Auch für CashCode AMZ-PLUS: Einbauanleitung (3 seiten)

Seite drucken

STEP 6:

Locate the chamfered edge on the new chip, sit the new chip in the socket and press

down. NOTE: The chip should go down into the socket with little effort. DO NOT

FORCE IT. DO NOT ALIGN THE CHIP ACCORDING TO THE POSITION OF THE

LABEL. MATCH THE CHAMFERED EDGE.

STEP 7:

DIP switch settings do not change. Re-install the CPU circuit board. Use the tweezers

and place the cables into the connectors. Push the connector heads down to lock the

cables into the connectors. Re-insert the plastic push rivet in the side along with the

spacer. Place the cover plate back and re-insert the two (2) push rivets or screws.

Apply the update sticker to the outside of your validator for reference.

STEP 8:

Power up the validator and begin accepting the new $ 5 and $ 10 bills.

CashCode - Installation Instructions for the New $ 5 and $ 10 upgrade kit

Stackerless Models AMZ-154 and AMZ-PLUS with PLCC type CPU chip

US2xxx30

US4xxx30

US5xxx30

Chamfered Edge

Page 5 of 5