Danfoss VLT AutomationDrive FC 302 Einbauanleitung - Seite 3

Blättern Sie online oder laden Sie pdf Einbauanleitung für DC-Antriebe Danfoss VLT AutomationDrive FC 302 herunter. Danfoss VLT AutomationDrive FC 302 4 Seiten. Igbt module replacement for d1h–d8h drives
Auch für Danfoss VLT AutomationDrive FC 302: Betriebshandbuch (16 seiten), Installationshandbuch (20 seiten), Installationsanleitung Handbuch (6 seiten), Installationsanleitung Handbuch (12 seiten), Installationshandbuch (18 seiten), Installationsanleitung Handbuch (8 seiten), Installationsanleitung Handbuch (10 seiten), Installationshandbuch (6 seiten), Installationshandbuch (16 seiten), Betriebsanleitung (16 seiten), Installationsanleitung Handbuch (6 seiten), Installationshandbuch (16 seiten), Installationshandbuch (8 seiten), Installationsanleitung Handbuch (6 seiten), Installationshandbuch (6 seiten)

Seite drucken
Danfoss VLT AutomationDrive FC 302 Einbauanleitung
Installation Instructions
X2.1–X2.4 Motor Connectors M23 (in M25)
Female
General ratings
•
Pins 1, 2, 3, and 4: 480 V AC, maximum 15 A.
•
Pins C and D: 30 V DC, maximum 3 A.
•
Tightening torque: 1.5–2.0 Nm (13.3–17.7 in-lb).
Pin
Label
Connected to frequency
converter wiring schematic
1
U
3
V
4
W
2
PE
Table 4.3 Wire/Connector Assignment for Plug X2
Mating part: Motor X2 (male)
Phoenix ordering number: KCX-K0341/XX,XX
Maximum cable length: 7.0 m (23 ft)
2 Motor Connection Variant (134N3195)
To meet the protection rating, always keep blind plugs
installed.
Label
Connected to frequency converter wiring schematic
X2.1-B
53
X2.2-A
50
X2.1-A and
Connected to a common terminal
X2.2-B
X2.1-C and
Connected to an open terminal available in the
X2.2-C
frequency converter
X2.1-D and
Connected to an open terminal available in the
X2.2-D
frequency converter
Table 4.4 2 Motor Connection
4 Motor Connection Variant (134N3196)
Label
Connected to frequency converter wiring schematic
X2.1-B
53
X2.4-A
50
X2.1-A and
Connected via an internal terminal
X2.2-B
X2.2-A and
Connected via an internal terminal
X2.3-B
X2.3-A and
Connected via an internal terminal
X2.4-B
Table 4.5 4 Motor Connection
MI04G402
VLT® AutomationDrive FC 302 with Connectors
Minimum
2
wire [mm
(AWG)]
96 (U)
2.5 (14)
97 (V)
2.5 (14)
98 (W)
2.5 (14)
99 (PE)
2.5 (14)
Danfoss A/S © 11/2015 All rights reserved.
X51 PROFIBUS M12 Male, X52 PROFIBUS M12
Female
General ratings
•
30 V DC, maximum 1 A.
•
Tightening torque: 0.2–0.3 Nm (1.8–2.7 in-lb)
Label
Connected to frequency converter PROFIBUS
connector
1
5 V DC
2
–
3
0 V DC
4
–
Table 4.6 PROFIBUS Connection
Mating part: PROFIBUS X52 and X51 (female/male)
Phoenix ordering number: SAC-2P-MSB/ XX,XX-910/FSB SCO CT
X11–X14 I/O Connector Box (134N3195–
134N3196)
Phoenix sensor/actuator box - SACB-4/4-L-0,57HPUR CDA -
1531426.
Tightening torque sensor/actuator cable: 0.4 Nm (3.5 in-lb).
Label
Wire
Connected to frequency converter
X11-X14 1
Brown
X11-X14 2
X11-X14 3
Blue
X14-4
Gray
X13-4
Yellow
X12-4
Green
X11-4
White
Table 4.7 Connector Box (134N3195–134N3196)
X11–X14 I/O Connector Box (134N8410)
Phoenix sensor/actuator box - SACB-4/4-L-0,57HPUR CDA -
1531426.
Tightening torque sensor/actuator cable: 0.4 Nm (3.5 in-lb)
Label
Wire
Connected to wiring schematic
X11-X14 1
Connected to
Brown
frequency
X11-X14 2
converter wiring
X11-X14 3
Blue
schematic
X14-4
Gray
Connected to C-
X13-4
Yellow
option, MCO 305
X12-4
Green
wiring schematic
X11-4
White
Table 4.8 Connector Box (134N8410)
67
63
66
62
wiring schematic
12
+24 V Out
20
COM D IN
33
D IN
29
D IN/OUT
19
D IN
18
D IN
12
+24 V Out
20
COM D IN
X57-4
–
X57-3
–
X57-2
–
X57-1
–
3