Duncan Enviro DD30 Benutzerhandbuch - Seite 6

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Traktor-Zubehör Duncan Enviro DD30 herunter. Duncan Enviro DD30 17 Seiten. Smart ag electric drive operation

Seite drucken

Front Screen - Overview

Front Screen

Settings Menu

> Select the Settings tab (looks like a gearwheel) to display

the settings menu. This will mostly be used the access the

calibration screens which are described in the calibration

section of this manual.

Display Tiles

>A display tile shows the data for the name of the tile. This

can be any input. In this case the screen is setup to display

the data relevant to the seed drill.

>Pressing on a display tile can be used to change the setting

(if available) for that tile. eg: Press and hold the Front Bin (or

Rear Bin) tile for 1 second and you will see the rate for that

bin. Use the - or + to change if needed.

>Pressing on the Applied Ha tile allows you to reset the area

to zero to record a new job.

Front Screen Tabs

>Different tabs display different sets of display tiles. These are

preconfigured but may be customised to you liking. Please

refer to the SmartAG Operator's Manual for details.

Note that at any time, the system may be returned to Factory

Settings using the supplied USB memory stick.

'Enviro DD30'

SmartAG Overview