Aoni 883 Benutzerhandbuch - Seite 2
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Kopfhörer Aoni 883 herunter. Aoni 883 4 Seiten.
Seite drucken
The headset battery has to be initially charged for at least for 4 hours.
While charging, the LED is solid red. When the battery has reached full capacity, the solid red LED will go off.
Turing your headset on and off
1. Press and hold the power button for several seconds to turn on the headset.
2. To power off the device, press and hold the power button again for a few seconds.
IV‐Advanced operation
Note: Before installing this product, please make sure your computer or laptop has the available built‐in Bluetooth feature.
If your computer is not Bluetooth‐enabled, you must purchase a Bluetooth dongle, preferably version 2.1 or above.
a. Pairing the headset with your laptop
1. Make sure the headset is off.
2. Activate the bluetooth program in your laptop to begin setup.
3. The "Search new device" screen will be displayed.
4. Place both devices not more than one meter away from each other.
5. Press the power button on the headset for about 4 seconds. When the blue and red LED will blink alternately, it indicates
that the headset has entered pairing mode.
6. You will find the product name aoni‐883 occurs on your laptop, press "pairing".
7. If the pairing is successful, the blue LED will blink every 3 seconds.
b. Pairing the headset with your phone
1. Make sure the headset is off.
2. Set your bluetooth phone to "discover" the wireless headset.
3. Place both devices not more than one meter away from each other.
4. Press the power button on the headset for about 4 seconds. When the blue and red LED will blink alternately, it indicates
that the headset has entered pairing mode.
5. You will find the product name
6. If the pairing is successful, the blue LED will blink every 3 seconds.
Please note: If your laptop/phone device is under version 2.1, please enter the passkey ="0000"(4 zero).
Press the power button on the headset for about 2 seconds will enter pairing mode automatically when your
device and the headset disconnected and the headset is on.
Using the Bluetooth
1. Answering and ending a call using your mobile phone.
When there is an incoming call, the headset will ring.
Briefly press the power button to answer an incoming call. You may also press the answer button on your cellular
phone to receive the call in your headset.
To end a call, simply tap the power button once again. Likewise, you may also end the call directly using your cell
phone.
Double‐click the power button can activate the voice command feature.(Please refer to your handset manual for
more information about using the "voice dial feature").
You can also press the power button for about two seconds to redial the last call.
2. Initiating /answering and ending a call on VOIP
To make a call, simply dial the number by using your internet calling application.
When there is an incoming call, press the power button briefly. Music playback pauses temporarily.
To answer an incoming call, press the power button briefly. Music playback pauses temporarily.
To end a call, simply tap the power button once again.
aoni‐883
occurs on your laptop, press "pairing".
wireless headset.
®