Danfoss VLT Decentral FCD 300 Einbauanleitung - Seite 3
Blättern Sie online oder laden Sie pdf Einbauanleitung für DC-Antriebe Danfoss VLT Decentral FCD 300 herunter. Danfoss VLT Decentral FCD 300 4 Seiten. Installation box
Seite drucken
Installation Instructions
3.6 X52 Profibus M12 Female
For non-used connectors. Keep blind plugs installed to
connectors at all times to keep the enclosure tight.
General ratings
•
30 V DC, max. 1 A
•
Front/screw mounting IP66, UL type 4
•
Tightening torque: 0.2–0.3 Nm.
Pin
Label
1
Brown
2
White
3
Blue
4
Black
Table 3.6 Wire/Connector Assignment for Plug X52
Mating part: Profibus X52 and X51 (female/male)
Phoenix order No.: SAC-2P-MSB/ XX,XX-910/FSB SCO CT
XX,XX is the cable length in [m, cm]
3.7 LCP Connector
The LCP cable is only used during installation/commissioning.
The plug on the LCP connector must be mounted after use.
The Danfoss part number for the LCP cable is: 175N0162.
4 Installation
CAUTION
HIGH VOLTAGE
Potentially lethal voltage is present on the installation box.
•
Mount the correct branch circuit protection fuses
and the inverter before connecting the installation
box to the mains.
1.
Mount the installation box on a flat, solid surface.
2.
Connect the PE terminal to ground.
3.
Connect the motor cable to plug X2 on the instal-
lation box.
4.
Connect the mains cable to plug X1 on the instal-
lation box.
VLT® Decentral Drive FCD 300
Installation Box (175X0318/0320/0329)
MI04F102 – Rev 2013-11-25
3