Danfoss VLT FC 103 Installationshandbuch - Seite 14

Blättern Sie online oder laden Sie pdf Installationshandbuch für DC-Antriebe Danfoss VLT FC 103 herunter. Danfoss VLT FC 103 18 Seiten. Igbt module replacement for d1h–d8h drives
Auch für Danfoss VLT FC 103: Betriebshandbuch (16 seiten), Installationshandbuch (20 seiten), Installationsanleitung Handbuch (6 seiten), Installationsanleitung Handbuch (8 seiten), Installationsanleitung Handbuch (10 seiten), Installationshandbuch (6 seiten), Betriebsanleitung (16 seiten), Installationshandbuch (16 seiten), Installationshandbuch (8 seiten), Installationsanleitung Handbuch (6 seiten), Installationshandbuch (6 seiten)

Installation

Wiring procedure for enclosure types D, E, and F

Mount the pre-configured cable wires with the

connectors on the fieldbus option. For cable

specifications, refer to chapter 3.8.2 Cable Specifi-

cations.

Fix the cable to the metal base plate using the

springs, see Illustration 3.12.

Tie down the cable and route it with other

control wires inside the unit, see Illustration 3.12.

Illustration 3.12 Wiring for Enclosure Types D, E, and F

NOTICE

Do not strip the Ethernet cable. Do not ground it via the

strain relief plate. Ground the screened Ethernet cables

through the RJ 45 connector on the PROFINET interface.

Installation Guide

3.9 Reassembling Cover

Follow the instructions in the frequency converter

Operating Instructions to commission the frequency

converter. The frequency converter automatically detects

the PROFINET interface and 2 new parameter groups

(group 9 and group 12) appear.

NOTICE

After installing the PROFINET interface, be aware of the

following parameter settings:

8-01 Control Site: [2] Control word only or [0] Digital and

control word

8-02 Control Word Source: [3] Option A

Mount the new front cover and the LCP.

Attach the sticker with the correct product name

to the front cover.

MG90U402