Danfoss VLT FC 103 Installationshandbuch - Seite 2

Blättern Sie online oder laden Sie pdf Installationshandbuch für DC-Antriebe Danfoss VLT FC 103 herunter. Danfoss VLT FC 103 6 Seiten. Igbt module replacement for d1h–d8h drives
Auch für Danfoss VLT FC 103: Betriebshandbuch (16 seiten), Installationshandbuch (20 seiten), Installationsanleitung Handbuch (6 seiten), Installationshandbuch (18 seiten), Installationsanleitung Handbuch (8 seiten), Installationsanleitung Handbuch (10 seiten), Betriebsanleitung (16 seiten), Installationshandbuch (16 seiten), Installationshandbuch (8 seiten), Installationsanleitung Handbuch (6 seiten), Installationshandbuch (6 seiten)

Installation Guide | VLT® 24 V DC Supply MCB 107

Illustration 1:

Connection to MCB 107 on Enclosure Sizes A2 and A3

1.3 Items Supplied

The VLT

24 V DC Supply MCB 107 is available in 2 versions: Standard and coated.

Table 1: Ordering Numbers

Version

Standard

Coated

For important information about safety precautions for installation, refer to the product-specific operating guide.

The drive contains DC-link capacitors, which can remain charged even when the drive is not powered. High voltage can be

present even when the warning indicator lights are off.

Failure to wait the specified time after power has been removed before performing service or repair work could result in death

or serious injury.

Stop the motor.

Disconnect AC mains, permanent magnet type motors, and remote DC-link supplies, including battery back-ups, UPS, and

DC-link connections to other drives.

Wait for the capacitors to discharge fully. The minimum waiting time is specified in the table Discharge time and is also

visible on the nameplate on top of the drive.

Before performing any service or repair work, use an appropriate voltage measuring device to make sure that the capacitors

are fully discharged.

Ordering number

130B1108

130B1208

W A R N I N G

Scope of Delivery, Safety, and Installation

AN287957936346en-000101 / 130R0308