Casio 2412 Benutzerhandbuch - Seite 4

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Siehe Casio 2412 herunter. Casio 2412 7 Seiten.

Seite drucken

Adjusting Image Contrast

Use the VISUAL DATABANK Mode to adjust image contrast.

• You can select an image contrast setting in the range of 1 (Darkest) to 15

(Lightest).

• The image contrast setting procedure is different from the display contrast

procedure described .

To adjust image contrast

1. In the VISUAL DATABANK Mode, hold down A for

about one second.

• This displays the MENU screen.

2. Use E and B to move the highlighting to

DELETE

CONTRAST, and then press F.

NAME

CONTRAST

• This displays the image along with a contrast

FORMAT

setting value.

• You can use the image screen to adjust contrast,

or you can use a special color chart screen,

which shows a number of different colored bars.

Press C to toggle the display between the image

screen and the color chart screen.

CNT - 8

• The image that appears for the contrast setting is

CNT - 8

the one you were last viewing in the VISUAL

DATABANK Mode.

• Only the color chart screen appears when you

perform the above step while image memory is

empty.

3. Use E (Lighter) and B (Darker) to adjust the

2‰‰1. 6.3‰.P1‰:58

contrast of the image.

4. After you are finished, press F to return to the

MENU screen.

5. Pressing A exits the MENU screen and returns to

CNT - 9

the screen that was on the display in step 1.

Attaching Text to an Image

You can use the following procedure to attach up to 24 characters of text to

each image.

To attach text to an image

1. In the VISUAL DATABANK Mode, use B and E to move the boundary to

the image to which you want to attach the text.

2. Press C to display the enlarged version of the selected image.

3. Hold down A for about one second until the

MENU screen appears.

4. Use E and B to move the highlighting to NAME.

DELETE

NAME

CONTRAST

FORMAT

5. Press F to display the text input screen.

6. Input the text you want.

• Use B and E to cycle through available

characters in the sequence shown below at the

current cursor location.• Holding down either

button scrolls at high speed.

2 ‰ ‰ 1 . 6 . 3 ‰ . P 1 ‰ : 5 8

• Press C to cycle input between alpha characters

(A), numbers (

• Use D to move the cursor.

Press E.

(space)

A to Z

0 to 9

•

7. After you finish inputting the text you want, press A to return to the screen

in step 2 of this procedure.

• The message WAIT NOW SORTING remains on the display as the

watch saves the text, and then the image appears.

• Pressing C displays the the enlarged version of the selected image

with text.

Image Sorting

Images in watch memory are automatically sorted according to the first letter of

their attached text (alpha characters → numbers → symbols). Images that do

not have any attached text come last, sorted according to their recording dates

(oldest first).

• If multiple images have the same text, those images are sorted according to

their recording dates (oldest first).

• Images transferred to the watch using the IR Mode may not be sorted

correctly.

USER'S GUIDE 2412

),and symbols (&).

Press B.

(

)

—

Deleting Images

You can use the following procedures to delete a specific image or all images

currently stored in watch memory.

To delete all images in watch memory

1. In the VISUAL DATABANK Mode, hold down A for

about one second until the MENU screen appears.

2. Press E or B to select DELETE.

DELETE

NAME

CONTRAST

FORMAT

3. Press F to display the DELETE menu.

DELETE

4. Press B or E to select ALL.

• Selecting CANCEL and pressing F returns to

PAGE

ALL

the previous screen.

CANCEL

5. Press F and a confirmation message appears on

the display.

6. If you really want to delete the image, press B or

DELETE

E to select YES and then press F. To clear the

confirmation message without deleting anything,

ALL

select NO and press F.

YES

• The message WAIT DELETE ALL remains on

the display as the delete operation is in progress.

The MENU screen appears after the delete

operation is complete.

• You can return to the normal VISUAL DATABANK Mode screen during the

above procedure by pressing A at any point before actually deleting the

image in step 7.

To delete a specific image

1. In the VISUAL DATABANK Mode, use B and E to move the boundary to

the image you want to delete.

2. Press C to display the enlarged version of the selected image.

3. Hold down A for about one second until the MENU screen appears.

4. Press E or B to select DELETE.

5. Press F to display the DELETE menu.

6. Press B or E to select PAGE and press F.

• The image that will be deleted appears on the display. At this time you

could use E and B to select a different image, if you want.

7. Press F again and a confirmation message appears on the display.

8. If you really want to delete the image, press B or E to select YES and then

press F. To clear the confirmation message without deleting anything,

select NO and press F.

• The message WAIT DELETE PAGE remains on the display as the

delete operation is in progress. The watch automatically clears the

message and returns to the DELETE menu after the delete operation is

complete.

• You can exit the image delete screen during the above procedure by

pressing A at any point before actually deleting the image in step 8.

• Depending on the size of the image you delete, the remaining memory

capacity value may not change after deletion is complete.

Formatting Image Memory

Perform the steps below to re-format Wrist Camera memory whenever you

experience image memory problems due to memory error, etc.

Important!

• Formatting image memory deletes all images there.

• If formatting does not solve the problem, format two or three times.

To format image memory

1. In the VISUAL DATABANK Mode, hold down A for

about one second until the MENU screen appears.

2. Use E and B to move the highlighting to

DELETE

FORMAT.

NAME

CONTRAST

FORMAT

3. Press F and a confirmation message appears on

the display.

4. If you really want to format image memory, press

B or E to select YES and then press F. To clear

the confirmation message without formatting image

memory, select NO and press F.

FORMAT

• The message WAIT FORMAT stays on the

display while formatting is in progress. After

formatting is complete, the MENU screen

YES

appears.

• If you want to cancel the format procedure at any

time before step 4, press A. Note that formatting

cannot be canceled once the WAIT FORMAT

message is on the display.