Danfoss DEVIreg 532 Installationshandbuch - Seite 9

Blättern Sie online oder laden Sie pdf Installationshandbuch für Thermostat Danfoss DEVIreg 532 herunter. Danfoss DEVIreg 532 16 Seiten. Electronic thermostat

Seite drucken

DEVIreg™ 532

Connect the thermostat according to the connection

diagram.

The screen of the heating cable must be connected

to the earth conductor of the power supply cable by

using a separate connector.

Note: Always install the floor sensor in a conduit in

the floor.

Set the maximum floor temperature between 20 °C

and 50 °C by turning the screw with temperature

indications in the upper left corner.

Mount and reassemble the thermostat:

• Fasten the thermostat to a flush-mounting box

or a surface-mounting box by driving the screws

through the holes in each side of the thermostat.

• Install the frame and front cover in the reverse

order of disassembly.

Turn on the power supply.

Installation Guide

LOAD

Mains

Max. Load

220-240V~

15 (1) A

D532

NTC

IP31

-10T30