Casio 2687 Betriebshandbuch - Seite 3

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Siehe Casio 2687 herunter. Casio 2687 5 Seiten.

Seite drucken

Operation Guide 2607 2637 2687

Time Recorder

The Time Recorder lets you store up to 30 records of the

Time record number

current time (month, day, hour, minutes, seconds, and

DST on/off setting) with the touch of a button. One way

you can use the Time Recorder is to record the start time

and the end time of a particular event.

To record a Time Recorder time

In the Timekeeping Mode, hold down B to record the

Home City time (month, day, hour, minutes, seconds, and

DST on/off setting).

Recorded date

• The recorded time flashes for about two seconds, and

(Mouth – Day)

then it is assigned a record number. After that, the

Recorded time

Timekeeping Mode screen appears.

(Hour : Minutes Seconds)

• Records are assigned numbers sequentially from

through

#30

• Storing a new time record when there are already 30

records stored in memory automatically deletes record

#01

, shifts the remaining records upwards by 1, and

stores the new record as

To recall Time Recorder times

In the Time Recorder Mode, use D (+) and B (–) to scroll through times stored in

memory.

• If you recorded a new Time Recorder time since you last entered the Time Recorder

Mode, the newest record appears first. If you have not recorded a new time, the

record you were viewing when you last exited the Time Recorder Mode appears first.

To delete all Time Recorder times

In the Time Recorder Mode, hold down A to delete all Time Recorder times.

Alarms

The Alarm Mode gives you a choice of four one-time

Alarm number

alarms and one snooze alarm.

Also use the Alarm Mode to turn the Hourly Time Signal

(

SIG

) on and off.

• There are five alarms numbered

and

SNZ

. You can configure

only. Alarms

time alarms only.

• Alarm settings (and Hourly Time Signal settings) are

Home city time

available in the Alarm Mode, which you enter by

Alarm time (Hour : Minutes)

pressing C.

To set an alarm time

1. In the Alarm Mode, use D to scroll through the alarm

screens until the one whose time you want to set is

displayed.

AL1

SIG

2. After you select an alarm, hold down A until the hour

setting of the alarm time starts to flash, which indicates

the setting screen.

• This operation automatically turns on the alarm.

3. Use C to move the flashing between the hour and

minute settings.

4. While a setting is flashing, use D (+) and B (–) to

change it.

5. Press A to exit the setting screen.

• When setting the alarm time using the 12-hour format,

take care to set the time correctly as a.m. (A indicator)

or p.m. (P indicator).

Alarm Operation

The alarm tone sounds at the preset time for 10 seconds, regardless of the mode the

watch is in. In the case of the snooze alarm, the alarm operation is performed a total

of seven times, every five minutes, or until you turn the alarm off.

• Pressing any button stops the alarm tone operation.

• Performing any one of the following operations during a 5-minute interval between

snooze alarms cancels the current snooze alarm operation.

Displaying the Timekeeping Mode setting screen

Displaying the snooze alarm setting screen

To test the alarm

In the Alarm Mode, hold down B to sound the alarm.

To turn an alarm on and off

1. In the Alarm Mode, use D to select an alarm.

Alarm on indicator

2. Press B to toggle it on and off.

• Turning on a one-time alarm (

AL4

) displays the alarm on indicator on its Alarm

Mode screen. Turning on the snooze alarm (

displays the alarm on indicator and snooze alarm

indicator on its Alarm Mode screen.

Module 2607

• In all modes, the alarm on indicator is shown for any

Snooze on indicator

alarm that is currently turned on. When the snooze

alarm is on, the snooze alarm indicator is displayed in all

modes.

• The alarm on indicator flashes while the alarm is

sounding.

Module 2637

• The snooze alarm indicator flashes during the 5-minute

Alarm on indicator

intervals between alarms.

Module 2687

#01

#30

AL1

through

AL4

SNZ

as a snooze alarm

AL1

through

AL4

can be used as one-

AL2

AL3

SNZ

AL4

AL1

AL2

AL3

SNZ

)

To turn the Hourly Time Signal on and off

1. In the Alarm Mode, use D to select the Hourly Time

Signal (

SIG

2. Press B to toggle it on (Hourly Time Signal on

indicator displayed) and off (Hourly Time Signal on

indicator not displayed).

• The Hourly Time Signal on indicator is displayed in all

Module 2607

modes when the Hourly Time Signal is turned on.

Hourly time signal

on indicator

Module 2637

Module 2687

Stopwatch

The stopwatch lets you measure elapsed time, split times,

and two finishes.

Hours

• The display range of the stopwatch is 23 hours, 59

Minutes

Seconds

minutes, 59.99 seconds.

• The stopwatch continues to run, restarting from zero

after it reaches its limit, until you stop it.

• Exiting the Stopwatch Mode while a split time is frozen

on the display clears the split time and returns to

elapsed time measurement.

• The stopwatch measurement operation continues even

if you exit the Stopwatch Mode.

• All of the operations in this section are performed in the

Home city time

Stopwatch Mode, which you enter by pressing C.

1/100 second

To measure times with the stopwatch

Elapsed Time

➤

Start

Stop

Re-start

Split Time

➤

Start

Split

Split release

(SPL/

SPL

displayed)

Two Finishes

➤

Start

Split

Stop

First runner

Second runner

finishes.

Display time of

first runner.

Backlight

The backlight uses an EL (electro-luminescent) panel that

Auto light switch on indicator

causes the entire display to glow for easy reading in the

dark. The watch's auto light switch automatically turns on

the backlight when you angle the watch towards your face

in the dark.

• The auto light switch must be turned on (indicated by

the auto light switch on indicator) for it to operate.

• See "Backlight Precautions" for other important

information about using the backlight.

Module 2607

To turn on the backlight manually

In any mode, press L to illuminate the display for about

one second.

Module 2637

• The above operation turns on the backlight regardless of

the current auto light switch setting.

Module 2687

About the Auto Light Switch

Turning on the auto light switch causes the backlight to turn on for about one second,

whenever you position your wrist as described below in any mode. Note that this

watch features a "Full Auto EL Light," so the auto light switch operates only when

available light is below a certain level. It does not turn on the backlight under bright

light.

Moving the watch to a position that is parallel to the ground and then tilting it

towards you more than 40 degrees causes the backlight to turn on.

Parallel to

ground

Warning!

• Always make sure you are in a safe place whenever you are reading the

display of the watch using the auto light switch. Be especially careful when

running or engaged in any other activity that can result in accident or injury.

Also take care that sudden illumination by the auto light switch does not

surprise or distract others around you.

• When you are wearing the watch, make sure that its auto light switch is turned

off before riding on a bicycle or operating a motorcycle or any other motor

vehicle. Sudden and unintended operation of the auto light switch can create a

distraction, which can result in a traffic accident and serious personal injury.

➤

Stop

Clear

➤

Stop

Clear

➤

Split release

Clear

Display time of

second runner.

More than

40 °