Danfoss FH-CWD Anleitung - Seite 4

Blättern Sie online oder laden Sie pdf Anleitung für Thermostat Danfoss FH-CWD herunter. Danfoss FH-CWD 16 Seiten.

3. Installation

Installing the Room Thermostat- fig. 5 and fig. 6

• Remove the connection cable between front and

back part.

• Connect the thermostat correctly to mains supply

according to the Wiring Diagram - fig 6.

• Mount the thermostat by using the enclosed

screws to the wall box.

• Mount the front correctly.

Wiring Diagram – fig. 6

The product must be connected to the following

leads:

• Term L:

• Term NO:

• Term NC:

• Term N:

• Term 2:

• Terminal S2:

• Terminal S1:

Turn ON/OFF the Room Thermostat Fig. 1 

• Turn the thermostat on or off by pressing

VI.CU.B2.02

Instruction FH-CWD Thermostat

Phase (L) AC85-250V, 50/60 Hz

Valve (NO)

Valve (NC)

Neutral (N)

Empty

Floor sensor

Produced by Danfoss Floor Heating Hydronics 05.2011