3W 42i Handbuch - Seite 9

Blättern Sie online oder laden Sie pdf Handbuch für Motor 3W 42i herunter. 3W 42i 19 Seiten.

3W 42i Handbuch

Carburetor settings

Before each engine is shipped it has to pass QC and is then test run. We do a basic adjustment
of the carburetor needles at that point.
Important: Do not remove the carburetor spring as the spring helps keep the carburetor butterfly
aligned properly. Merely release the ends of the spring so that it no longer holds the butterfly
closed.

Carburetor Linkage

Included with your engine is a metal bracket to extent your carburetor pushrod horn. Fix this
bracket onto the carburetor horn with a 2.6m machine screw and nut. Then solder the arm in place.
Refer to the attached illustration.
Note: The use of a soft pushrod for the throttle (plastic or nyrod) is not recommended. Use a metal
or carbon fiber pushrod with a plastic ball joint or plastic clevis at each end. This will keep your
RPM much more consistent and accurate around idle where it really counts.
3W 42i Engine Manual
highspeed needle H:
low speed needle L:
more infos: www.3w-modellmotoren.de
1 1/4
1 1/2