Dunlop Cry Baby CBM105Q Anweisungen zur Einrichtung - Seite 2
Blättern Sie online oder laden Sie pdf Anweisungen zur Einrichtung für Musik-Pedal Dunlop Cry Baby CBM105Q herunter. Dunlop Cry Baby CBM105Q 2 Seiten. Bass mini wah
Seite druckenCBM105Q
CRY BABY
BASS MINI WAH
®
POWER
SETUP INSTRUCTIONS
The CBM105Q Cry Baby Bass
• Run an instrument cable from
Mini Wah is powered by one 9-volt
your guitar to the CBM105Q's
battery (remove bottom plate to install),
INSTRUMENT jack and another
an AC adapter such as the Dunlop
cable from the CBM105Q's AMPLIFIER
ECB003/ECB003EU, or the DC Brick
™
jack into your amplifier's input.
and Iso-Brick
power supplies.
™
• Set VOL and Q controls to their
middle positions.
CONTROLS
• The CBM105Q is bypassed (off)
• VOL knob controls effect volume
while your foot is off the pedal.
• Q knob adjusts frequency width
To engage the wah effect, simply
of wah effect
press the toe of the pedal down
• Silent auto-return switching puts
with your foot.
pedal into bypass mode when
• Rock your foot back and forth on the
you take your foot off rocker
pedal to hear the vocal, expressive
tones that the Cry Baby Wah is
• AUTO-RETURN DELAY control
(internal) sets how long effect rings
famous for.
out after being disengaged
CONTROL DIAGRAMS
• Rotate Q control clockwise for
a narrower frequency range
and a more vocal sound; rotate
counterclockwise for a more
subtle wah filter effect.
• Rotate VOL control clockwise
to increase effect volume or
counterclockwise to decrease it.
• To increase effect ring-out time,
remove bottom plate and rotate
AUTO-RETURN DELAY pot
counterclockwise (set to 12 o'clock
by default). To decrease effect ring
out time, rotate the control clockwise.
Q CONTROL adjusts wah
VOL knob controls effect volume
frequency width filter intensity
Auto-return switching
AUTO-RETURN DELAY POT (INTERNAL)
SPECIFICATIONS
Impedance
Input
1 MΩ
Output
1 kΩ
Resonant Frequency
Heel Down
180 Hz
Toe Down
1800 Hz
Output Characteristics
Maximum Level
+7.5 dBV
VOL Control (Volume)
0dB/-21 dB
Heel Down Gain*
+22 dB / +8.5 dB
Toe Down Gain**
+32 dB / +12.5 dB
Bypass
Automatic
Buffered
Delay**
35ms to 550ms
Delay Factory Preset
290ms
Noise Floor***
Bypass
-100 dBV
Heel Down (Effect On)
-94 dB
Toe Down
-87 dBV
Current Draw
6.7mA
*VOL full CW, Q ADJ full CW/CCW
**Internal Adjustment
***A-weighted, VOL and Q ADJ full CW, 0dBV = 1V
RMS