Danfoss 176F4041 Installationshandbuch - Seite 10

Blättern Sie online oder laden Sie pdf Installationshandbuch für Medienkonverter Danfoss 176F4041 herunter. Danfoss 176F4041 18 Seiten. In-bottom/out-back cooling kit for fa09-fa10, frequency converters

Seite drucken
In-bottom/Out-back Cooling Kit for FA09-FA10
Installation Guide
1
2
3
4
Illustration 7: Installation of the Top Cover
1
M5x14 screws
2
Top cover
2.6 Creating a Vent Opening in the Base Plate
To create a vent opening in the base plate for the bottom duct, use the following steps. Use the dimensions in
frequency converters, and
Illustration 9
Procedure
1.
Cut out the vent opening in the cabinet base plate using the dimensions in the template.
2.
Drill 6 screw holes (4 mm) around the vent opening using the dimensions in the template.
The holes must match the holes in the lower flange of the bottom duct.
10 | Danfoss A/S © 2022.03
for FA10 frequency converters.
3
Top cover gasket
4
Top vent
AN371942757356en-000101 / 136R0252
Installation
Illustration 8
for FA09