Dunlop MXR Dyna Comp Bedienungsanleitungen - Seite 2
Blättern Sie online oder laden Sie pdf Bedienungsanleitungen für Musikanlagen Dunlop MXR Dyna Comp herunter. Dunlop MXR Dyna Comp 2 Seiten. Compressor
Seite drucken
CSP102SL SCRIPT DYNA COMP
DESCRIPTION
The Script Dyna Comp Compressor
combines old school compression
tone with upgrades for modern gigging
convenience. Spec'd from our own
1976 Dyna Comp Compressor, this
pedal features the rare CA3080 "metal
can" integrated circuit (IC), which yields
quieter operation, greater transparency,
and increased dynamic range. An effect
status LED and AC power jack upgrade
this compressor for easy use on stage.
POWER
The Script Dyna Comp Compressor
is
powered by one 9-volt battery
(remove bottom plate to install), a
9-volt AC adapter such as the Dunlop
ECB003, or the DC Brick
and Iso-Brick
™
power supplies.
CONTROLS
• OUTPUT knob controls overall
effect volume
• SENSITIVITY knob sets compression ratio
• FOOTSWITCH toggles effect on/bypass
(red LED indicates on)
DIRECTIONS
• Run a cable from your guitar to the
CSP102SL's INPUT jack and run
another cable from the CSP102SL's
OUTPUT jack to your amplifier.
• Start with both controls at 12 o'clock.
• Turn the effect on by depressing
the footswitch.
• Rotate OUTPUT knob clockwise to
increase overall volume of effect or
counterclockwise to decrease it.
• Rotate SENSITIVITY knob clockwise
to increase sensitivity (more compression)
™
or counterclockwise to decrease it
(less compression).
COMPRESSOR
®
SPECIFICATIONS
Input Impedance
Output Impedance
Max Input Level
Noise Floor*
Current Draw
Bypass
Power Supply
*A-weighted, all controls at mid position
470 kΩ
10 kΩ
-5 dBV
>- 87 dBV
2.2 mA
True Hardwire
9 volts DC