Danfoss iC7 Series Installationshandbuch - Seite 7

Blättern Sie online oder laden Sie pdf Installationshandbuch für Medienkonverter Danfoss iC7 Series herunter. Danfoss iC7 Series 18 Seiten. In-bottom/out-back cooling kit for fa09-fa10, frequency converters
Auch für Danfoss iC7 Series: Installationshandbuch (8 seiten), Installationshandbuch (8 seiten), Installationshandbuch (6 seiten), Installationshandbuch (14 seiten), Installationshandbuch (16 seiten), Installationshandbuch (8 seiten), Installationshandbuch (8 seiten), Installationshandbuch (10 seiten), Installationshandbuch (16 seiten), Installationshandbuch (16 seiten), Installationshandbuch (6 seiten), Installationshandbuch (6 seiten), Installationshandbuch (16 seiten)

In-bottom/Out-back Cooling Kit for FA09-FA10

Installation Guide

74 (2.9)

8x Ø 6 (0.2)

2x Ø 8 (0.3)

Drive Mounting Holes

Illustration 4: FA10 Mounting Plate Template for In-bottom/Out-back Cooling

2.4 Preparing the Backplate

To create a vent opening in the cabinet backplate to match the opening in the mounting plate, use the following steps. Use the

dimensions in

Illustration 5

for FA09 frequency converters, and

Procedure

Cut out the vent opening in the cabinet backplate using the dimensions in the template.

The vent opening must match the mounting plate opening.

Drill screw holes (6 mm) around the vent opening using the dimensions in the template.

The FA09 requires 6 holes around the vent opening, and the FA10 requires 8 holes around the opening. The holes must

align with the holes in the outer flanges of the back vent.

321 (12.6)

280 (11.0)

2x Ø 8 (0.3)

Drive Mounting Holes

10 (0.4)

271 (10.7)

Illustration 6

for FA10 frequency converters.

110 (4.3)

130 (5.1)

1051 (41.4)

AN371942757356en-000101 / 136R0252 | 7

Installation