Dunster House E3-2515SS Installationshandbuch - Seite 10

Blättern Sie online oder laden Sie pdf Installationshandbuch für Gartenhäuser Dunster House E3-2515SS herunter. Dunster House E3-2515SS 14 Seiten.

Shingles

1. If you have bought roof membrane first fully cover the roof boards using this roof membrane. We suggest to fix it using

a stapler.

2. If your shingles have a peelable plastic backing remove this before installing them to the roof.

3. Starting on the lowest edge of the cabin roof, place a row of shingles over the top of the roof membrane, if you have

purchased this, with the slots/hexagons running upwards and the black edge of the shingle overhanging the roof by

15-20mm and nail along the bottom edge of the tile using 4 nails supplied. Carefully trim off any excess at the end of the

row and keep any full 'tongues'.

4. Lay a second layer of shingles on top of the first row. This time rotate the shingles 180° so that the slots/hexagons are

running downwards. Each row of shingles needs to be offset so cut the first strip into the half. Nail through the center

band of the tile using 4 nails supplied.

5. Lay the next row of shingles with the slots/hexagons in the downwards position, off setting the tiles by half a segment.

Secure by nailing through the centre band.

6. Continue to lay shingles in rows off-set and overlapping each row until you have reached the ridge. (Use the off cuts to

fill in the spaces at the beginning and end of the rows).

7. Once you have reached to top, place one row of shingles offset by half a segment. Nail down the area that covers the

roof board and with the remaining section of shingles, bend and place it up against the side of the cabin to form a 'slide'

look. Please Refer to 'Step F' onwards before securing into place.

Roof board

Eaves edging

Shingles Installation

Step A

Shingles

All dimensions are approximate and subject to the limitations of the material used and the methods of manufacture

1.5 x 2.5m (28mm) Side Store

Shingles (15-20mm overhang)

Roof membrane

(5mm overhang)

Roof membrane

Nails

First layer of shingles

with the slots/hexagons

facing upwards

Page 9