Duo-Therm 3109228.001 Betriebsanleitung - Seite 2

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Thermostat Duo-Therm 3109228.001 herunter. Duo-Therm 3109228.001 9 Seiten. Duo-therm comfort control center

Seite drucken

Your recreational vehicle manufacturer has equipped your

vehicle with Duo-Therm's Comfort Control Center™. The

Comfort Control Center has been designed for you to easily

operate all the air conditioning and gas heating appliances

found in your vehicle from one location.

In order to familiarize yourself with the operation of the

Comfort Control Center, the following diagram along with the

accompanying text will explain all the functional character-

istics of the system.

MODE

MODE OFF

FAN

TEMP

DOWN

ZONE

OFF

A. LIQUID CRYSTAL DISPLAY – Your Comfort Control

Center is equipped with a liquid crystal display (LCD)

that identifies the mode of operation, the temperature

set-point, the zone identification and the fan speed. The

Comfort Control Center is designed to accept and

control many varied air conditioning and gas heating

appliances. When you begin to first operate your Com-

fort Control Center, you will see that the LCD readout will

only show the options available based on the appliances

installed on your vehicle. An incandescent light will

illuminate the LCD area when a selector button is

pushed for easy reading at all times.

B. MODE SELECTOR BUTTON – Modes of operation

available are: OFF, FAN ONLY, COOL, HEAT PUMP,

FURNACE, HEAT STRIP and AUX. HEAT. Remem-

ber, your LCD readout will only show the options

available based on the appliances installed on your

vehicle. To select the mode of operation, momentarily

depress the MODE push-button. You will need to

continue to depress and release the button until the

desired mode is shown in the LCD readout area on the

Comfort Control Center.

To determine the Comfort Control Center options avail-

able to you, depress and release the MODE push-button

until it goes through all selections.

A. Liquid Crystal Display

B. Mode Selector Button

C. Fan Speed Selector Button

D. Temperature Selector But-

tons

E. Zone and Stage Selector

F. On/Off Switch

C. FAN SPEEDS – Possible available fan speeds are:

LOW, MEDIUM, HIGH and AUTO. To select the desired

fan speed, momentarily depress the FAN push button.

You will need to continue to depress and release the

FAN button until the desired fan speed is shown in the

LCD readout area of the Comfort Control Center.

D. TEMPERATURE SELECTOR BUTTONS – The tem-

perature Set-point range is from 40° to 99° Fahrenheit or

4° to 37° Celsius. Determination of Fahrenheit or Celsius

standard is done at the time of your manufacturer's

installation of the Climate Control Center. To set the

temperature at your comfort level, simply depress and

release the UP or DOWN push-button until the desired

temperature is shown in the LCD readout area of the

Comfort Control Center.

E. ZONE SELECTOR BUTTON – A

established at the time of installation of your Comfort

Control Center. If you have one air conditioner, you will

have one ZONE. If your vehicle has more than one cooling

system, depending on the manufacturing installation,

you may have 2, 3 or 4 ZONES. Zones are defined and

preset by your manufacturer. A zone is an area of

cooling/heating which is controlled independently within

that area, and regulated at the Comfort Control Center.

A typical example of a two zone application would be a

vehicle with two air conditioning systems, one in the front

area (living room, kitchen) and one in the back section

(bedroom and bath). The front area could be established

as ZONE 1 and the back section ZONE 2. You can select

the desired temperature and fan speeds for each zone

independently, thereby keeping your bedroom cooler

than the front portion of the vehicle. To determine the

number of established zones in your vehicle, depress the

ZONE push-button. ZONE 1 will be the first ZONE to

appear in the LCD readout. The ZONE number selected

will begin to flash and will flash for approximately 30

seconds or until another ZONE has been selected.

Continue to depress and release the ZONE button until

you see ZONE 1 reappear.

F. ON/OFF SWITCH – The ON/OFF switch is located on

the lower right hand edge of the Comfort Control Center.

Move the lever from side to side to change status.

ZONE is also