AUDIOBYTE Hydra VOX Benutzerhandbuch - Seite 6

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Medienkonverter AUDIOBYTE Hydra VOX herunter. AUDIOBYTE Hydra VOX 19 Seiten.

AUDIOBYTE

If both supply cables are correctly attached, the Audiobyte Hydra VOX is

automatically powered-up when the Hydra ZAP is powered on (use Hydra ZAP

touch-screen). If proper communication between the two devices has been

established, a green dot will be visible near the VOX text on the Hydra ZAP main

screen.

At power-up, the Hydra VOX will briefly display the Audiobyte logo screen

and then enter the default screen.

To shut down the Hydra VOX, the user must press the stand-by button on

the Hydra ZAP main screen.

Upon shut-down the DAC saves its current settings, which are resumed at

the next start-up: current selected input, PCM and DSD filters, DSD direct state,

phase mode, headphone detect state, I2S mode and attenuation level.

If stored attenuation level is lower than -20dB (volume is too loud), the

attenuation is limited to -20dB at next start-up. Also, if mute is enabled at shut-

down, it is automatically disabled at start-up.

Use the Hydra VOX touch-screen to adjust its settings. The VOX main screen

has the following controls:

• the top-right button is used to select between the DACs three inputs

(circular selection):

o USB;

o I2S;

o S/Pdif.

• the bottom left and right buttons are used to adjust the volume level.

Pressing once on these buttons will show the current volume level without

Hydra VOX DAC Owner's Manual