Free The Tone Arc-53m Benutzerhandbuch - Seite 8

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Aufnahmegeräte Free The Tone Arc-53m herunter. Free The Tone Arc-53m 16 Seiten. Audio routing controller

Seite drucken

• How to store MIDI PC# (program change number) sends in Presets

Use the INC/+, DEC/–, and PS/L switch to recall the bank and preset to be used.

Press the DISP MODE switch to select "MIDI PC & CC#".

NOTE: MIDI channels 1–4 are already assigned to the Select Switches 1–4. By pressing the Select Switch 1, the MIDI program change

number to be sent via MIDI channel 1 is shown in the display. Default setting is all OFF.

Press the Select Switch to which the desired MIDI channel has been assigned.

Press the INC/+ or DEC/– switch to set the MIDI program change number you want to send. Or select "OFF" if you do not want to send

any program change number.

Press the STORE switch to store your selection.

4-4 Edit Mode

Detailed setups of the ARC-53M are done in Edit mode. Holding down the MODE switch for three seconds puts the ARC-53M in Edit mode

and the display shows "MN" (menu). Press one of the PS/L switches to select the desired menu item. The following menu items are assigned

to the PS/L switches:

PS1/6/L1: PRESET

PS2/7/L2: MIDI

PS3/8/L3: SETUP

PS4/9/L4: UTILITY

When you select the menu item by pressing the corresponding PS/L switch, the display shows the screen assigned to that menu. You can

also recall the desired item directly by pressing the Select Switch on the control panel.

To exit from Edit mode to usual operation mode, press the MODE switch.

NOTE: In Edit mode, your changes are conﬁrmed when the ENTER switch on the control panel is pressed. You do not have to press the

STORE switch.