Free The Tone CW-1Y Benutzerhandbuch - Seite 7
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Musik-Pedal Free The Tone CW-1Y herunter. Free The Tone CW-1Y 10 Seiten. Multiple filtering delay
Seite druckenGlobal Settings
Global Setup Screen
Press and hold the HOME switch for about 2 seconds to show the Global Setup screen.
Display it when setting Global functions of COSMIC WAVE such as MIDI channel settings.
SETUP
MIDI CH
Global
Function
CH1
Setting Procedures for Global Functions
In the Global Setup screen, settings related to the entire operation such as MIDI receive channel selection,
calibration of expression pedal, etc. are configured.
1. Hold down the HOME switch for about 2 seconds to show the Global Setup screen.
2. Use the ◀/▶ cursor key to show the desired setting screen.
3. Configure the desired function.
4. Press the HOME switch. The display changes to the HOME screen.
NOTE
For complete list of Global menu items, refer to Global Menu Flowchart on p. 16.
MIDI CH - Setting of MIDI Receive Channel
①
Sets the MIDI receive channel.
Parameter OMNI (default): Receives all of the MIDI signals from CH1 to CH 16.
CH1 to 16: Receives MIDI signals from the selected MIDI channel.
OFF: No MIDI signals are received.
②
msec/BPM - Setting of Delay Time Display
Selects the delay time display unit.
Parameter msec (default): Delay time is shown in milliseconds.
BPM: Delay time is shown in BMP.
NOTE
BPM: Beat Per Minute. Used to show the tempo of performance indicated by the number of quarter notes
(crotchets) counted in one minute (60 seconds).
msec: Short for millisecond. 1 millisecond is equal to one thousandth of a second.
ex) 100 msec = 0.1 seconds. Delay time can be set from 1 msec to 9,999 msec (about 10 seconds).
12
Shows that there is a next page
Parameter
③
TAP FSW - Setting of TAP Footswitch
Selects the function to be assigned to the TAP footswitch.
Parameter TAP (default): TAP tempo entry function is assigned.
PRESET 1-2: Each press of the footswitch recalls presets 1 and 2 alternately.
④
PRIORITY - Setting of Delay Time Priority
Sets the priority delay time when the preset is switched.
Parameter PRESET (default): The delay time stored in the preset takes precedence.
TAP: The Tap-entered delay time takes precedence. When the preset is recalled, the saved delay
time is ignored and the tap-entered delay time is used.
⑤
RESAMPLE - Setting of Behavior at Delay Time Change
Sets how to switch to the delay sound when the delay time is changed by TAP tempo entry.
Parameter OFF (default): The delay sound is stopped once and then newly output with the new delay time
setting.
ON: The delay sound is not stopped but transferred to the one that has the newly applied delay
time. Please note that the pitch of the delay sound will change when the delay time changes.
⑥
FREQ BAS - Setting of 3-BAND EQ / BASS Frequency
Selects the frequency assigned to the BASS band of the 3-band EQ.
Parameter 100 Hz, 200 Hz (default), 300 Hz
⑦
FREQ MID - Setting of 3-BAND EQ / MIDDLE Frequency
Selects the frequency assigned to the MIDDLE band of the 3-band EQ.
Parameter 500 Hz, 750 Hz (default), 1 kHz
⑧
FREQ TRB - Setting of 3-BAND EQ / TREBLE Frequency
Selects the frequency assigned to the TREBLE band of the 3-band EQ.
Parameter 1.5 kHz, 2.0 kHz (default), 3.5 kHz
⑨
COSMIC E: GAIN - Setting of Cosmic Filter Gain
Sets the gain of the Cosmic filter used in Cosmic Mode E. The higher the gain, the stronger the filter effect.
Parameter 0.00 to 0.99 (default value: 0.15)
13