DUOMATIC 50 B Gebrauchsanweisung

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Zeitschaltuhr DUOMATIC 50 B herunter. DUOMATIC 50 B 2 Seiten.

Seite drucken

Operating instruction

The DUOMATIC 50 B timer is compatible

with all standard switch programmes with

50mm x 50mm cutouts (in accordance with

DIN 49075).

Reset Mode

ATTENTION!

This appliance is not intended for use by

person (including children) with reduced

physical, sensory or mental capabilities, or

lack of experience and knowledge, unless

they

have

been

given

instruction concerning use of the appliance

by a person responsible for their safety.

Children should be supervised to ensure

that they do not play with the appliance.

Wiring diagram

Motor

Terminal

Technical appliances data

Nom. operating voltage:

Switching voltage:

Switching contact load:

Temperature range:

Travel time:

Switching delay:

Accuracy:

Reserve power:

Degree of protection:

Safety class:

Conformity:

ATTENTION! Work on the 230V supply may only be carried out by a certified electrician!

DOWN button < 1 sec. Inching mode; or STOP when motor running

DOWN button > 1 sec. DOWN command 2 min.

UP button < 1 sec.

UP button > 1 sec.

Mode button > 2 sec.

Mode button < 2 sec.

Reset button

Press the Mode button

> 2 sec.

Set the time with the

UP or DOWN buttons

Confirm with the Mode

button

Set the UP time with

the UP or DOWN

buttons

Confirm with the Mode

button

supervision

Set the DOWN time

with the UP or DOWN

buttons

Confirm with the Mode

button

If the RESET button is pressed all values return to the factory settings:

Daily programme:

Time:

Function mode:

Pressing the Mode button switches through all possible function modes

successively. You can select from 3 modes:

man

auto

In the automatic mode the shutters are raised or lowered automatically at

the programmed times.

230V / 50 Hz

250V AC

3A (cos phi=1)

Touch the direction buttons (about 1 sec.) to slant the blind slats. The

0°C to +45°C

system remains in the Automatic mode.

2 min.

min. 0,5 sec.

< 5 sec./day

≥ 16 hrs.

If the random generator is activated the programmed UP and DOWN times

IP 40

are moved back randomly by 1 - 31 minutes.

Operating the timer

Inching mode; or STOP when motor running

UP command 2 min.

Activating the programming mode

Changing the operating mode (manual mode;

automatic; random automatic)

Initialising the appliance (new start); appliance is

reset to the factory settings

Programming the timer

Time blinks. After new initialising and RESET the

factory setting blinks (=> 12:00h).

As soon as the UP or DOWN button is pressed

the display stops blinking. If the UP or DOWN

button is held the time display accelerates up to

half-hour steps.

Current UP time is displayed. UP arrow blinks.

After new initialising: factory setting UP time

(=> 07:00h).

If the UP or DOWN button is held the time display

accelerates up to half-hour steps. UP arrow

blinks.

Current DOWN time is displayed. DOWN arrow

blinks. After new initialising: factory setting DOWN

time (=> 21:00h)

If the UP or DOWN button is held the time display

accelerates up to half-hour steps. DOWN arrow

blinks.

Exit from programming mode; time and selected

mode are displayed.

Factory settings

UP 07:00h, DOWN 21:00h

12:00h

man

Possible function modes

Manual control

Automatic (daily programme)

Automatic (daily programme) + random generator

Inching mode

Random generator

DUOMATIC 50 B