AudioCodes 405HD Kurzanleitung - Seite 3
Blättern Sie online oder laden Sie pdf Kurzanleitung für IP-Telefon AudioCodes 405HD herunter. AudioCodes 405HD 4 Seiten. Gbe ip phone
Auch für AudioCodes 405HD: Kurzreferenz-Handbuch (2 seiten)
Seite drucken
4. Mounting
You can mount your phone on a desktop or on a wall.
Desktop mounting: Slide the short edges of the L-shaped stand (the prongs) into the phone's two rear
slots (see A below). Slide the prongs in until they lock.
Wall mounting: Hook the phone's two rear notches (see B below) onto wall mounting screws.
Pull out the handset's cradle clip, which is by default in desktop mounting position, invert it, and then
push it back in. This is the wall mounting position.
A
B
5. Operating the Phone
To make a call:
Pick up the handset, enter a phone number and then press the Dial softkey. To call a
phone contact, press the directory icon
the contact and then press the Dial softkey.
To redial a number:
To answer a call:
Pick up the handset or press the Accept
To end a call:
Onhook the handset or press the End softkey.
To put a call on hold and make another call:
enter a phone number and press the Dial softkey. To return to the held call, press the Resume softkey.
To transfer a call:
1.
During a call, press the TRANSFER key, enter the phone number of the party to whom to transfer the
call, and then press the Dial softkey.
2.
After that party answers, press the Trans softkey.
To perform blind transfer, consult your IT manager.
To mute a call:
Press the mute
A
B
Press the REDIAL key, select a dialed number, and then press the Dial softkey.
key. To resume the conversation, press the mute key again.
A
softkey, access the Corporate or Personal directory, select
softkey.
Press the Hold softkey and then the New Call softkey,
A