AudioCodes C448HD Kurzanleitung - Seite 3
Blättern Sie online oder laden Sie pdf Kurzanleitung für IP-Telefon AudioCodes C448HD herunter. AudioCodes C448HD 8 Seiten.
Seite drucken
4. Mounting the Phone on a Desktop or Wall
Desktop: Slide the L-shaped stand's short or long edge slots onto these rails.
Wall: Slide the wall mount fitting onto these rails.
To mount the phone on a wall:
1.
Using the mounting plate's two screw holes as a template, mark the locations on the wall where
you want to mount the phone. The horizontal distance between the screw holes is 4 7/8 inches
(123.8 mm).
2.
Drill a hole in the wall at the two marked locations.
3.
Insert an anchor (not supplied) in each hole for the 3.9mm screws.
4.
Insert two screws (not supplied) into the two masonary anchors. It's recommended to use tapp
3.9 x 32mm (DIN 7981 C) self-tapping pan Phillips-head screws.
5.
Leave about 3/16 inch or 5 mm between the screw head and the wall.
6.
On the rear of the phone, detach the base used for desktop mounting.
Desk Mount
P a g e
Wall Mount
| 3