AudioCodes LTRT-36802 Kurzanleitung - Seite 2
Blättern Sie online oder laden Sie pdf Kurzanleitung für Netzwerk-Router AudioCodes LTRT-36802 herunter. AudioCodes LTRT-36802 3 Seiten. Broadband voip gateway and wireless router
Seite drucken
4. Configuring VoIP Parameters
Before you can make VoIP calls, you need to register with an
Internet Service Provider (ISP) and obtain account and SIP Proxy
server information.
1.
From the menu bar in the left pane, click Voice Over IP; the 'Voice
Over IP' page appears in the right pane.
2.
Click the Line Settings tab, select check boxes only of lines that are
connected to telephones (clear those not connected), and click Apply.
3.
Click the Action
icon corresponding to your FXS telephone lines,
and then in the 'Line Settings' page, configure the parameters with
values provided by your ISP.
4.
Click the Signaling Protocol tab, and then select the check box 'Use
SIP Proxy'. In the field 'Proxy IP Address or Host Name', enter the
ISP's Proxy server's IP address or host name, as provided by your
ISP. Click OK to complete the VoIP configuration.
To verify successful registration to the Proxy server, ensure that
the PHONE LEDs flash green, or in the Voice over IP tab (System
Monitoring
menu),
"Registered" for the configured FXS lines.
5.
Pick up the phone receiver and listen for a dial tone; you're now ready
to make an outgoing VoIP call.
the
entry
'SIP
Registration'
AudioCodes CPE & Access Gateway Products
MP-202C Series
MP-202C Broadband VoIP Gateway
displays
MP-202C Broadband VoIP Gateway
and Wireless Router
Quick Guide
and Wireless Router
LTRT-36802