Freecast CP7039 Benutzerhandbuch - Seite 7

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Transmitter Freecast CP7039 herunter. Freecast CP7039 7 Seiten.

Seite drucken

Case 2:

When the receiver needs to be restored the default Wi-Fi password,

it needs to be re-paired with the transmitter (as to the detailed operation instruction,

please see above).

Case 3:

The transmitter and the receiver need to be re-paired if anyone is replaced in case

of loss or damage.

The following is the operation of the transmitter

and receiver pairing:

1. Please long press the Pairing Key of the receiver and the transmitter for more

than 3 seconds separately, and then the blue WiFi lights of the transmitter and the

receiver will flash rapidly which indicates that the transmitter and the receiver are

into the pairing status; and this process lasts about 10 seconds. when the blue WiFi

indicators both the transmitter and receiver keep on, it is indicating that the

transmitter and the receiver have completed the pairing process and implemented

the Wi-Fi connection.

2. If the blue WiFi indicators both the transmitter and the receiver are still flashing

rapidly for a long time, it is indicating that the pairing process is not successful.

Please reboot thetransmitter and the receiver separately, and then repeat the

above pairing process.

Notification!

Do not long press the Pairing Key of the transmitter under normal use of the product,

since it will cause the Wi-Fi reconnecting between the transmitter and the receiver.

Restore default Wi-Fi password of receiver

The Wi-Fi password of receiver can be customized by the Free-cast App. If you forget

the password, long press the Reset Key on the right side of the receiver for more than 3

seconds to restart the receiver, then pair the transmitter and the receiver. when the

blue WiFi indicators both the transmitter and receiver keep on, it is indicating that the

transmitter and the receiver have completed the pairing process and implemented

the Wi-Fi connection, and then the Wi-Fi password of the receiver has been restored

to the default value as 12345678.

FCC Statement

Changes or modifications not expressly approved by the party

responsible for compliance could void the user's authority to

operate the equipment.

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency

energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications

. However, there is no guarantee that interference will

not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or

more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC rules. Operation is

subject to the following two conditions (1)this device may not

cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause

undesired operation.