AudioCodes MP-20 Series Handbuch für häufig gestellte Fragen - Seite 7

Blättern Sie online oder laden Sie pdf Handbuch für häufig gestellte Fragen für Adapter AudioCodes MP-20 Series herunter. AudioCodes MP-20 Series 20 Seiten. Telephone adapter
Auch für AudioCodes MP-20 Series: Handbuch zur Schnelleinrichtung (8 seiten), Handbuch zur Schnellinstallation (2 seiten), Handbuch zur Schnellinstallation (2 seiten)

Frequently Asked Questions

Q1:

How must I configure my PC in order to connect to the MP-20x Web interface?

For an explanation on configuring your PC for connection to MP-20x Web interface, refer to

Section "Configuring Network Parameters" in LTRT-52702 MP-20x FXS Telephone Adapter

Quick Installation Guide.

Q2:

Why can't I access MP-20x Web interface when my PC is connected to the LAN?

Access problems to MP-20x Web interface from the LAN may be caused by one of the

following:

Your PC is not connected to the LAN - verify that your PC is physically connected to the

LAN and not to the WAN.

The IP address (URL) that you enter in your Web browser is incorrect (the MP-20x default

LAN IP address is 192.168.2.1).

The Web interface's login name and password are incorrect (the default login user name

and password is "admin").

By default, MP-20x allocates IP addresses to the LAN (i.e., DHCP server) with the IP

address range of 192.168.2.2 to 192.168.2.254. The 'IP Address Distribution' screen

allows you define the MP-20x DHCP server IP address pool, as shown below:

Any connected PC can behave as a DHCP client or with a static IP address within the

range defined above.

Two PCs cannot use the same IP address for 60 minutes or less, even if the first PC was

disconnected. Each IP address within the distribution range is held for a maximum of 60

minutes if used before.

AudioCodes Customer Support

Page 7