AudioControl ACX-300.2 Schnellstart-Handbuch - Seite 4
Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Verstärken AudioControl ACX-300.2 herunter. AudioControl ACX-300.2 12 Seiten. Compact high power all-weather 2-channel amplifier
Seite drucken
3. Remote Power Input Wire – This wire connects to the 12V remote
trigger output of some head units and controls the on/off state of
the amplifier. Alternatively, you can use the GTO™ feature of the
amplifier so it will turn on when an speaker level signal is detected
at the RCA inputs.
4. Power LED – When the unit has been powered on, this LED will
glow green and soft, like the understory of the Pacific Northwest
Rain Forest on a rare, sunny day.
5. Input Level – Use this switch to specify which type of signal input
voltage type you are using - high is speaker level & low is the RCA
line level.
4
5
6
7
8
6. Protection LED – This LED will shine if there is a problem being
sensed by the unit. If this lights up, remove the speaker connec-
tion and RCA inputs and try again. If error clears, examine your
speaker, speaker wires, and RCAs for possible causes of short. If
the issue still persists after removing the speakers/RCAs, best to
call the lonely folks in tech support.
7. Gain Control – This control allows you to adjust the overall
output level. Turn clockwise to increase, and counter-clockwise to
decrease. With the source unit set to 75%, adjust this knob to the
point where the Maximized light shines briefly. This will be your
optimal gain setting.
9 10
ACX-300.2
4
Quick Start Guide