Freedom Freedom 200+p Benutzerhandbuch

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Autoalarm Freedom Freedom 200+p herunter. Freedom Freedom 200+p 7 Seiten.

Seite drucken
"Protect Yourself And Your Investment"
OWNER'S MANUAL
MODEL: 200+P
COPYRIGHT: OMEGA RESEARCH & DEVELOPMENT 1999
Introduction
Congratulations on your purchase of this vehicle security system. In learning to
operate your security system, please become familiar with the following three principal
components: the Remote Transmitter, the Red LED Status Light, and the Valet Switch.
The Remote Transmitter:
Each security system comes with two pre-learned
transmitters, but can learn up to 4 different transmitters. The transmitter has two buttons:
one large button and a smaller button. This system is pre-programmed, through a built-in
learning routine, to have the transmitter buttons work in the following configuration:
The large button is used to arm, disarm and panic the security system.
The small button pressed for 2 seconds operates the optional trunk release feature.
Pressing the small button twice within two seconds will arm or disarm the system without
the siren chirp confirmation (silent arm/disarm). The small button can be used, in
conjunction with the large button, to operate remote sensor bypass.
Both buttons pressed together can be used to activate the 3rd Channel output or engage
the Anti-Carjacking feature, provided it is programmed to operate.
The Valet Switch:
This switch is used to prevent automatic system functions such
as Last Door Arming or Automatic Rearming by placing the system into Valet Mode. The
Valet Switch is also used, with the ignition key, to disarm the security system in the event
the transmitter becomes inoperable, and this switch is also used in the procedure for
programming features and transmitters.
Page - 3

Table Of Contents

The Remote Transmitter ............................................................................................................. 3
The Valet Switch ........................................................................................................................ 3
The Red LED Status Light ......................................................................................................... 4
Transmitter Operations ............................................................................................................... 4
Active Arming The Security System Using The Transmitter .................................................... 5
Arming Bypass ........................................................................................................................ 5-6
Auxiliary Sensor Bypass ............................................................................................................ 6
Passively Arming The Security System With The Last Door Arming Feature ...................... 6-7
Security System Armed And Activated .................................................................................. 8-9
Disarming The Security System ................................................................................................. 9
Safety Disarm/Storm Mode ...................................................................................................... 10
Automatic Rearming ................................................................................................................ 10
Remote Panic ............................................................................................................................ 11
The Valet Switch And Valet Modes ................................................................................... 11-12
Red LED Status Light - Security System Status ................................................................. 13-15
Siren And Parking Light Confirmation ............................................................................... 15-16
Shock Detection And Prewarn Circuit ..................................................................................... 17
Trunk Release And 3rd Channel Output .................................................................................. 17
Programmable Features ....................................................................................................... 18-25
Total System Reset .............................................................................................................. 25-26
Encoding Transmitters ........................................................................................................ 26-27
Second Vehicle Operation ........................................................................................................ 27
Limited Lifetime Warranty ........................................................................................ Back Cover
The Red LED Status Light:
be in and also serves as a visual deterrent to break-ins and theft. Please spend time reviewing
this guide and to become familiar with your vehicle security system.
Transmitter Operations
LED Light- Illuminates when
the Transmitter is operating.
Large Transmitter Button-
Pressing and releasing this
button will arm and disarm
the alarm, which optionally
locks and unlocks the doors.
Pressing and holding this
button for 2 seconds will
"Panic" the alarm- sounding
the siren, flashing the exte-
rior lights.
Both The Large and Small
Transmitter Buttons- Pressing these buttons together for 3 seconds will engage the 3rd
Channel Output or the programmable Anti-Carjacking feature. Please see the sections
describing these features.
Informs you of the different conditions the system can
Small Transmitter Button-
Pressing this button alone for 2
seconds can be used to remotely
open the trunk. If this button is
pressed twice within 2 seconds
the system will arm or disarm
without the confirmation siren
chirps. If this button is pressed
within 5 seconds after arming
the system, the shock sensor, if
present, will be bypassed.
Page - 4