Acer XD1250P Handbuch - Seite 40

Blättern Sie online oder laden Sie pdf Handbuch für Projektor Acer XD1250P herunter. Acer XD1250P 45 Seiten. Acer projector user's guide

Appendices

Warning: Lamp

compartment is hot!

Allow it to cool down

before changing lamp!

Warning: To

reduce the risk of

personal injury, do not

drop the lamp module

or touch the lamp bulb.

The bulb may shatter

and cause injury if it is

dropped.

English ...

Replacing the lamp

The projector will detect the lamp life itself. It will show you

a warning message "Lamp is approaching the end of its useful

life in full power operation. Replacement Suggested!" When

you see this message, changing the lamp as soon as possible.

Make sure the projector has been cooled down for at least 30

minutes before changing the lamp.

Lamp Changing Procedure:

1. Turn the power off the projector by pressing the Power button.

2. Allow the projector to cool down at least 30 minutes.

3. Disconnect the power cord.

4. Use a screwdriver to remove the screw from the cover.

5. Push up and remove the cover.

6. Remove the 2 screws from the lamp module.

7. Pull out the lamp module.

To replace the lamp module, reverse the previous steps.







