Duplo DB-200 Betriebshandbuch - Seite 8

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Bindemaschine Duplo DB-200 herunter. Duplo DB-200 18 Seiten. Perfect binder

Operation Procedures

Turn ON the power switch of DB-250 as shown.

( where "I" for ON; "O" for OFF )

The heater of DB-250 will automatically heat

the glue to the preset working temperature and

display the status of the heating processes.

• The 4 leftmost spaces of LED: the status of

heating process ( COLD, WARM, or HOT ).

• The 2 rightmost spaces of LED: The elapsed

time of heating.

Start melting the glue.

The status is COLD a nd the elapsed time is one

minute for this example as shown.

Melting glue is processing.

The status is WARM and the elapsed time is 10

minutes for this example as shown.

After heating for a while, the glue temperature

has reached HOT status. The elapsed time is 20

minutes for this example as shown.

When the glue temperature has reached the

working temperature, DB-250 performs the self-

test and stirs the melting glue.

DB-250 is ready for bookbinding and set to

MANUAL mode for your desired operation.

At this moment, the control panel will display

and flash "LOAD BOOK" for your attention.

For binding operations, please refer to the

MANUAL, AUTO and PAD operations.